+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Hooks and Safety Latches

Hooks ship with declarations of conformity as standard, and can be delivered with third-party test-house reports. Several of our special hook models carry embossed symbols on the body so deformation and correct lifting angles can be read at a glance.

View Products→

Subcategories

All Products

1–25 of 211 productsPer page102550100
▦ Grid☰ List
1 ton Spannfix - Ratchet lashing strap
Load Securing

1 ton Spannfix - Ratchet lashing strap

• Yellow chrome-plated tensioning mechanism • Non-slip webbing • Quality controlled

1-ton lashing strap
Load Securing

1-ton lashing strap

With SpanSet refining numerous details, this 1-ton lashing offers unparalleled robustness and durability in its class. Key innovations: High tensioning force, a wider and longer tensioning handle for easy tensioning. Working with SpanSet makes work effortless. The 1-ton lashing strap is specially woven and has a smooth surface. This prevents snagging and fraying. Info Both lashings are suitable for use even under the toughest conditions. Superior coating technology guarantees a long service life.

2M
Load Securing

10-tonne ABS stops heavy loads with double the power

Heat, cold, moisture and salt water, impact and misuse, harsh conditions: SpanSet quality ABS ratchet will not let you down even under the harshest conditions. Safety and ease of use are an added bonus. During the tensioning process, the final tooth previously depended on arm force. Thanks to the patented double-layer drive gear, the tensioning process provides greater safety and convenience in practical half steps. This delivers higher pretensioning force and more practical operation through smaller increments. Standard ratchets release the strap in a single motion. During release, if the load is not stable, it can tilt dangerously. The ABS tensioning system releases the pretension force in small steps, allowing you to take precautions against the risk of the load toppling over. Ideal for operators of any physical strength. Requiring less effort, this lighter and easy-to-use 10-tonne ratchet provides greater safety and power with less exertion. New: When choosing, opt for the EPIS system featuring RFID technology. Lashing straps must be inspected at least once a year by qualified personnel. Please contact 2M Makina.

250 kg - Buckle 25 mm
Load Securing

250 kg - Buckle 25 mm

• Non-slip webbing • Quality controlled

5 ton Spannfix - Lashing strap
Load Securing

5 ton Spannfix - Lashing strap

• Achieve the required safety tension effortlessly. • Low cost • Less tensioning force • Back protection • Easy and comfortable handling • Durable construction

500 kg - Buckle 25 mm
Load Securing

500 kg - Buckle 25 mm

• Non-slip webbing • Quality controlled

750 kg - Ratchet 35 mm
Load Securing

750 kg - Ratchet 35 mm

• Non-slip webbing • Quality controlled

ABS 4-ton ratchet lashing
Load Securing

ABS 4-ton ratchet lashing

Effectively coated against abrasion, thermal fine fibre, interwoven tubular webbing and an elongation of under 4% – this is the anti-blocking ABS lashing strap. Now even better with new, wear-resistant high-tech yarns. The result: Greater safety for a long service life! We offer two different options; consult us for the appropriate use, whether applying pull or push tension.

ABS 5-tonne tensioner
Load Securing

ABS 5-tonne tensioner

Standard ratchets release the strap in a single motion. During release, if the load is not stable, it can dangerously tip over. The ABS tensioning system releases the pretension force in small steps, allowing you to take precautions against the risk of the load toppling over. During the tensioning process, the final tooth previously depended on arm force. Thanks to the patented double-tier drive gear, tensioning provides greater safety and convenience with practical half-steps. This achieves greater pretensioning force and more practical operation through small steps. Heat, cold, moisture and salt water, impact and rough use, harsh conditions: The SpanSet quality ABS tensioner will not let you down even under the harshest conditions. Safety and ease of use to boot. Equipped with a PVC label protector to further extend label life. A shortened label length, the use of stronger material, and an additional PVC sleeve encasing the entire label are among the features of the new label. You Can Easily Measure the Tensioning Force. With the new TFI (Tension Force Indicator), it is possible to measure and adjust the applied tensioning force, and TFI sizes with capacities of 250, 500 and 750 daN are available. Order your tensioner with TFI and increase safety.

ACP - Self-centering hydraulic pullers
Hydraulic Equipment

ACP - Self-centering hydraulic pullers

ACP heavy-duty self-centering hydraulic pullers are available in 4 different models. The 3 legs are interconnected by a mechanism that allows them to self-center automatically. Pullers with capacities between 10 and 50 tonnes are 3-legged, and both 2-leg and 3-leg models of the 10-tonne puller are available. All models include a detachable hollow piston, manual pump, hydraulic hose, and a 100 mm diameter pressure gauge. All models are designed for pushing, pulling, mounting, and dismounting press-fitted or heat-fitted parts such as gears, bearings, sleeves, gear wheels, internal bearings, wheels, sprockets, flywheels, etc. • Working capacity between 10 and 50 tonnes • Quick setup, easy to use • Manufactured with legs made of high-quality hot-forged steel.

AHP - Air-driven hydrotest pumps - Standard flow
Hydraulic Equipment

AHP - Air-driven hydrotest pumps - Standard flow

• Output pressure ranging from 6 to 2931 bar • Suitable for use with various fluids • 150 mm diameter dual-scale pressure gauge • Air consumption 0.79 m³/min • Variable output flow rate • Maximum weight 23 kg • Includes air inlet filter, pressure regulator, and lightweight oil tank • 8 different models available with pressure capacities ranging from 6 bar to 2931 bar • Optional stainless steel tank produced • Optional IP65-rated piston-mounted microswitch stroke counter available

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow
Hydraulic Equipment

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow

Hi-Force AHP-CR series air driven hydrostatic pressure test pumps are offered to users in 8 models with different capacities ranging from 6 bar (87 PSI) up to 2931 bar (42500 PSI). Fitted as standard on all pumps is a chart recorder capable of recording values on a single chart for up to 4 hours. All models are suitable for operation with various fluids including water, and feature a glycerine-filled pressure gauge, air inlet filter, lubricator and pressure regulator unit, plastic fluid reservoir, pump start/stop valve, and a reinforced stainless steel skid frame. A recorder by-pass valve and pressure release valve are fitted on the pump as standard. Optionally, a stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorders with different clock speeds can be supplied. All units have a maximum weight of 31kg. • Output pressure up to 2931 Bar • Suitable for use with various fluids • 150mm dual scale anti-vibration pressure gauge • Air consumption 28 scmf (0.79 m/min) • Infinitely variable output pressure and flow • 7 litre capacity • Supplied with 50 recording charts, 1 chart pen, with additional charts and pens available.

AHP11 - Single-Stage Air Hydraulic Pump
Hydraulic Equipment

AHP11 - Single-Stage Air Hydraulic Pump

Working pressure is 700 bar, operating with 7 bar air pressure. The compact, lightweight and powerful AHP11 single-stage air-driven hydraulic power unit is an economical and mobile (portable) alternative to manual pumps. The pump pedal is suitable for both foot and hand operation. All pumps are delivered with the oil reservoir pre-filled with oil, ensuring the pumps are ready for use immediately upon supply. • 2-way and 4-way control valve options • Internal overload safety relief valve • Oil reservoir level indicator • Standard oil reservoir capacity up to 10 litres

AHP2 - Air driven hydrotest pumps - High flow
Hydraulic Equipment

AHP2 - Air driven hydrotest pumps - High flow

AHP2 series air driven hydrostatic pressure test pumps offer 5 different model options with output pressure capacities ranging from 17 Bar (246 PSI) to 1634 Bar (23700 PSI). All models feature a compact design and operate compatibly with various fluids, while incorporating a 150mm diameter glycerine filled pressure gauge, air filter, lubricator and pressure regulator, lightweight fluid reservoir, pump on/off valve, and a reinforced stainless steel protective cage. Optional stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorder with various clock speeds can be supplied. • Output pressure ranging from 17.2 to 1634.1 bar • Suitable for use with various fluids • 150 mm diameter dual scale pressure gauge • Air consumption 1.59 m³/min • Variable output pressure and flow rate • Air inlet filter, pressure regulator, lightweight oil tank standard • Optional stainless steel tank available • Optional IP65 class piston-mounted microswitch stroke counter available

ATDP - Air-driven double-acting twin hydrotest pumps
Hydraulic Equipment

ATDP - Air-driven double-acting twin hydrotest pumps

Air-driven twin double-acting ATDP series hydrotest pumps are available in 3 different models with capacities ranging from 87 bar to 1489 bar. Thanks to the twin double-acting design, the fluid volume delivered per stroke is significantly higher compared to the AHP and AHP2 series. All models feature a 150mm diameter glycerine-filled pressure gauge, air inlet filter, regulator, lubricator unit, and pump on/off valve. If the pump is to be used with special fluids or chemicals, it can be manufactured with Viton and ethylene propylene seals upon order. Seals made of different materials can be manufactured upon request. • Output pressure ranging from 87 to 1489 bar • Suitable for use with various fluids • Twin double-acting design allows high-volume flow • Air consumption: 6m³/min • Can be used with various fluids, including water • 150mm diameter dual scale pressure gauge • Variable output pressure and flow • Air inlet filter, regulator and lubricator • Optional stainless steel reservoir available, IP65 rated piston-mounted microswitch stroke counter available • Weather-resistant paint finish, pressure isolation valve

BC - Battery-powered cable lug crimping tools
Hydraulic Equipment

BC - Battery-powered cable lug crimping tools

The battery-operated lug crimping tools in the BC range include 4 models, offering either a “C” shaped jaw or a parallel guide design with a 360-degree rotating head. While providing all the versatility of the manually operated CH and SC range, this product range increases speed and offers ease of use due to battery operation. All models are supplied with a battery charger, shoulder strap, and tool storage case. In addition to the standard die sets supplied with each crimping tool as indicated, optional die sets are also available as shown in the table below. • Supplied with a standard die set • Battery status • Efficient and fast battery charging

BRAVO
Manual Lifting Equipment

BRAVO

The Tractel lever chain hoist has proven its quality and durability through simple and safe operation. Along with its low weight and ergonomic housing, its maintenance-free use is extremely easy. The chain is released by turning the hand wheel or by pulling the unloaded chain. Under load, the pressure brake prevents unintentional lowering of the load. Special requests can be made for longer chain lengths. Call 2M. • Simple and safe operation • Free-chaining position • Standard series production with 1.5 m round link chain • Smooth operation with steel bearings • Thanks to the free-chaining handwheel, the load hook can be pulled into the desired position with a single hand movement while the directional lever is in neutral • The load is held safely during position changes of the directional lever • Easily portable anywhere thanks to its lightweight and compact design • Special forged steel swivel suspension and load hooks with safety latches, tested for 10,000 open/close cycles • Maximum load is lifted with minimum lever effort; superior mechanical efficiency • Load chain is premium-quality German RUD brand.

BUX - BM and BMP series battery-powered lifting magnets
Lifting Attachments

BUX - BM and BMP series battery-powered lifting magnets

• Built-in 12V battery provides at least 8 hours of continuous operation • Handheld infrared remote control operates the magnet from up to 5 m away • Special sensor prevents power cut-off during lifting • Release is performed by pressing two buttons to prevent accidents • Visual and audible low battery warning • If the battery level is too low, the magnet cannot be switched on • Opening cover allows easy access to the battery and control panel • Additional lift and release buttons located on the magnet • LED indicator showing battery charge level and thermal automatic circuit breaker

BW - Backup wrench
Hydraulic Equipment

BW - Backup wrench

BW series backup wrenches prevent the bolt being tightened from rotating and provide easy tightening and removal using a lever to prevent nut kickback. Once clamped, the T-Bar design adjustable reaction point remains locked until the operation is completed. • Suitable for use with TWS-N and TWH-N torque wrenches • Interchangeable hexagon links • Positive release mechanism

CH - Cable crimping tool
Hydraulic Equipment

CH - Cable crimping tool

CH series cable lug crimping tools feature C-jaw and parallel guide type options. Models with a 180° rotating head facilitate working in confined spaces. Pump units include the HP227FPC foot-operated pump set. This set also includes an elbow fitting, pressure gauge and block, and a 3-metre hydraulic hose with male coupler. All models except CH1000 include HP227FC, MB1 metal case, the selected crimping tool and its dies. In addition to the standard die sets supplied with each cable crimping tool as specified, optional die sets are also available as shown in the table below. • CH80 and CH63 models are suitable for crimping connectors up to 630 mm² cross-section • CH30, CH32 and CH40 CH-Cable crimping tools are suitable for crimping uninsulated terminals up to 400 mm² cross-section • CH1000 is suitable for crimping transmission and distribution lines up to 1000mm² cross-section • 7 different model options • Die set included with the product • CH21 model is suitable for crimping uninsulated terminals with 240 mm² cross-section • Working pressure 700 bar • Each includes a quick-connect coupler • Optional C-jaw or parallel jaw design • Easy connection option for confined spaces

Control/Directional valves
Hydraulic Equipment

Control/Directional valves

PMV type flow control valves are mounted on the pump. RMV type flow control valves can be mounted remotely from the pump. • Working pressure 700 bar • Can be mounted on the pump or at a different location • Manual and solenoid types are available

CT - Hydraulic cutters with integral pump
Hydraulic Equipment

CT - Hydraulic cutters with integral pump

2 models are available capable of cutting 25mm diameter wire rope and 40mm diameter cable. Used for cutting wire rope, metal bar, wire strands and cable. • Cutting capacity up to 40mm • Capable of cutting a wide range of materials • Self-contained hydraulic design

Digital pressure gauges
Hydraulic Equipment

Digital pressure gauges

Driven by the demand for digital gauges, Hi-Force has added the HDG1 and HDD1 digital gauges to its product range, as well as the HPT1 pressure transducer featuring the HDD1 gauge. Offering users higher accuracy (0.5% terminal point accuracy), these models represent a significant advancement compared to dial gauges with 1% accuracy. HPT1 pressure transducers also provide users with the option of remote pressure reading, which is preferred in certain applications. • Pressure measurement capability up to 1.000 Bar (14.503 PSI) • Readout in Bar, PSI, mPa, kg/cm³ units as well as other user-defined measuring units via the programmable unit • Compatible with a wide variety of fluids thanks to laser-welded stainless steel sensor and socket • Tare function, minimum and maximum memory, blue backlit display, rubber protective boot and IP67 waterproof enclosure • Minimum 2.000 hours battery life

DYNAFOR® Remote-controlled digital crane scale - LLXh
Crane Technology

DYNAFOR® Remote-controlled digital crane scale - LLXh

The LLXh, the new remote-controlled model of the Dynafor LLX series, is a load scale that delivers precision measurements, can be fitted to various crane hooks, and safely transported to any working site with its carrying case. Operating time from 300 hours to 1000 hours (varies depending on application) • Capacity from 15 tonnes to 250 tonnes • Display operated via wireless communication up to 80 metres in open space • 2.4 GHz international radio frequency compliance • Interchangeable display • Combination with various sensors and displays • Resistant to sudden shocks and weather conditions • CEM certification • Optional connection capability (PC/dynafor LLX2 connection via USB) • Accuracy ± 0.2 % • For IP 67 models, accuracy ± 0.2 % and 60 metres operating range