+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Hydraulic Pullers

Hydraulic pullers remove interference-fit parts — bearings, pulleys, gears, couplings — without damaging the shaft, for jobs where a mechanical puller is not enough or impact removal would risk the component.

Two and three-arm, split-arm and internal types are available. Correct arm spread and centring decide both whether the part comes off and whether the operator is safe.

7 products
1–7 of 7 productsPer page102550100
▦ Grid☰ List
ACP - Self-centering hydraulic pullers
Hydraulic Equipment

ACP - Self-centering hydraulic pullers

ACP heavy-duty self-centering hydraulic pullers are available in 4 different models. The 3 legs are interconnected by a mechanism that allows them to self-center automatically. Pullers with capacities between 10 and 50 tonnes are 3-legged, and both 2-leg and 3-leg models of the 10-tonne puller are available. All models include a detachable hollow piston, manual pump, hydraulic hose, and a 100 mm diameter pressure gauge. All models are designed for pushing, pulling, mounting, and dismounting press-fitted or heat-fitted parts such as gears, bearings, sleeves, gear wheels, internal bearings, wheels, sprockets, flywheels, etc. • Working capacity between 10 and 50 tonnes • Quick setup, easy to use • Manufactured with legs made of high-quality hot-forged steel.

PKC - Versatile hydraulic puller set
Hydraulic Equipment

PKC - Versatile hydraulic puller set

The PKC heavy-duty hydraulic puller set includes 2 and 3-jaw pullers, bearing and bearing cup puller units. All models are designed for pushing, pulling, installing, and removing press-fitted or heat-fitted parts such as gears, bearings, sleeves, sprockets, inner races, wheels, final drive gears, flywheels, etc. Hydraulic components are detachable. • Operating in capacities from 10 to 50 tons • Provides 4 different pulling configurations in one set • Quick setup, easy to use • Operating pressure 700 bar • Supplied with a complete hydraulic set (including pressure gauge) • High-quality hot-forged steel jaws supplied in a carrying case.

PKS - 2-3 Leg hydraulic puller set
Hydraulic Equipment

PKS - 2-3 Leg hydraulic puller set

PKS heavy-duty hydraulic pullers are used for removing hard-to-dismantle components such as wheels, gears, sprockets, pulleys, sleeves, etc. by pulling. 8 different models are available in capacities up to 50 tons. All models come with detachable hydraulic sets. All models feature fast, safe, and easy operation; there is no need for heating the component or hammering prior to the operation. Note: PK202, PK302 and PK502 are 2-leg and are not complete sets. • Capable of operating in capacities from 4.5 to 50 tons • Quick to set up, easy to use • Manufactured with legs made of high quality hot forged steel. • Working pressure 700 bar • Multi-purpose hollow piston (except model PKS5-2-3) • Complete with full hydraulic set (pump, cylinder, hose, pressure gauge...) • In carrying case

SCP - Self-contained hydraulic pullers
Hydraulic Equipment

SCP - Self-contained hydraulic pullers

With capacities from 10 - 30 tonnes, capable of operating in any position with a closed hydraulic system, they are used without the need for an external pump to dismantle press-fitted parts, wheels, gears, sprockets, pulleys, and many other components. 3 different model options are available. All models feature an integrated manual pump and a multi-position pump handle. Each unit is supplied with a safety cover against dust generated during application.

STS - Bolt tensioning components-Metric
Hydraulic Equipment

STS - Bolt tensioning components-Metric

The modular design of Hi-Force SBT series spring return hydraulic tensioners enables the user to adapt an existing SBT tensioner assembly to another thread size within the tensioner group. This is achieved by purchasing individual components or a simple conversion kit. By changing the required components (see table below), Hi-Force SBT bolt tensioners provide a more economical and versatile solution. Tensioner models STS1, STS3, STS4 & STS6 are available with two different bridge sizes. Therefore, it is necessary to check whether the required thread change is possible within the bridge size (please follow the colored lines in the drawing below). Ensure all components match. DO NOT mix components with different colored lines. For a large bridge, you will need to use a long threaded puller. In this way, adequate thread engagement is guaranteed. Changes within the same color code DO NOT require changing the bridge, but changes from red to blue (or vice versa) MUST include the associated bridge. The red color corresponds to smaller bolt sizes within a tensioner group consisting of short threaded adapters, load cell, small nut rotating sockets, and tommy bar. The blue color represents larger bolt sizes. In this case, the tensioner consists of a long threaded adapter, load cell, large bridge, large nut rotating socket, and tommy bar. Do not forget to order your tommy bar when purchasing Hi-Force hydraulic tensioners. We recommend purchasing one tommy bar for every 4 hydraulic tensioners. • Used with STS Metric size spring return tensioners • Modular design • Versatile use

STS - Hydraulic bolt tensioners - Imperial
Hydraulic Equipment

STS - Hydraulic bolt tensioners - Imperial

The imperial-sized STS bolt tensioner range is designed for topside operations covering a wide variety of applications. These applications include pipeline flanges, heat exchangers, pressure vessels, compressor covers, boiler feed pumps, anchor bolts, and many others. The product range includes 26 imperial size options covering thread sizes from M16 to M100. All models are suitable for a maximum working pressure of 1500 Bar. All 6 models of hydraulic tensioners can be used with various threaded pullers and nut rotating sockets; this means that the maximum possible bolt size coverage can be achieved using a minimum number of hydraulic cylinders. Threaded pullers and nut rotating sockets are available individually. All Hi-Force hydraulic bolt tensioners are designed and manufactured with a coated piston, maximum stroke indicator, self-energising high-pressure seals, and dual quick-connect couplings for easy connection of multiple tensioners, providing user-friendly operation and maintenance. Manual or air-driven hydraulic pumps, high-pressure hoses, and fittings suitable for use with Hi-Force bolt tensioners can be selected from the relevant pages. The STS range tensioners are load return tensioners. STB type spring return tensioners can be found on the preceding pages. Note: The weight values given in the table apply only to the load cell and bridge. The total system weight varies depending on the dimensions of the puller and nut rotating socket. • Capacities from 234 to 2649 kN • Working pressure 1500 Bar • Single-acting design • Nitro-carburised piston • Maximum piston stroke indicator • Suitable for single or multi-tensioning operations • Custom design tensioners manufactured upon request • User-friendly operation and maintenance • Manual or air-driven pump options are available • Bolt sizes range from ¾” to 4” • Modular design for optimum versatility • Dual quick-connect couplings for easy connection

STU - Subsea bolt tensioners
Hydraulic Equipment

STU - Subsea bolt tensioners

Hi-Force STU series subsea bolt tensioners are designed for use by divers working in harsh subsea conditions. Thanks to their two-piece construction, they feature quick assembly and disassembly. • Working pressure: 1500Bar • Two-piece, easy-to-use design • Available in imperial and metric sizes • Two hose connections for easy hanging with a hook • Extra-long piston stroke to save resetting time • Single-acting design, reliable stroke limit mechanism • Corrosion-protected for subsea applications