+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Hydraulic Pumps, Hoses, Gauges

The power side of a hydraulic system: hand, electric and air-driven pumps, high-pressure hoses, couplers, gauges and valves.

A system is only as safe as its weakest link, so hose and coupler working pressures must match the cylinder they feed. The gauge is not just an indicator — it is the safety component you read the load from.

26 products
1–10 of 26 productsPer page102550100
▦ Grid☰ List
AHP - Air-driven hydrotest pumps - Standard flow
Hydraulic Equipment

AHP - Air-driven hydrotest pumps - Standard flow

• Output pressure ranging from 6 to 2931 bar • Suitable for use with various fluids • 150 mm diameter dual-scale pressure gauge • Air consumption 0.79 m³/min • Variable output flow rate • Maximum weight 23 kg • Includes air inlet filter, pressure regulator, and lightweight oil tank • 8 different models available with pressure capacities ranging from 6 bar to 2931 bar • Optional stainless steel tank produced • Optional IP65-rated piston-mounted microswitch stroke counter available

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow
Hydraulic Equipment

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow

Hi-Force AHP-CR series air driven hydrostatic pressure test pumps are offered to users in 8 models with different capacities ranging from 6 bar (87 PSI) up to 2931 bar (42500 PSI). Fitted as standard on all pumps is a chart recorder capable of recording values on a single chart for up to 4 hours. All models are suitable for operation with various fluids including water, and feature a glycerine-filled pressure gauge, air inlet filter, lubricator and pressure regulator unit, plastic fluid reservoir, pump start/stop valve, and a reinforced stainless steel skid frame. A recorder by-pass valve and pressure release valve are fitted on the pump as standard. Optionally, a stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorders with different clock speeds can be supplied. All units have a maximum weight of 31kg. • Output pressure up to 2931 Bar • Suitable for use with various fluids • 150mm dual scale anti-vibration pressure gauge • Air consumption 28 scmf (0.79 m/min) • Infinitely variable output pressure and flow • 7 litre capacity • Supplied with 50 recording charts, 1 chart pen, with additional charts and pens available.

AHP11 - Single-Stage Air Hydraulic Pump
Hydraulic Equipment

AHP11 - Single-Stage Air Hydraulic Pump

Working pressure is 700 bar, operating with 7 bar air pressure. The compact, lightweight and powerful AHP11 single-stage air-driven hydraulic power unit is an economical and mobile (portable) alternative to manual pumps. The pump pedal is suitable for both foot and hand operation. All pumps are delivered with the oil reservoir pre-filled with oil, ensuring the pumps are ready for use immediately upon supply. • 2-way and 4-way control valve options • Internal overload safety relief valve • Oil reservoir level indicator • Standard oil reservoir capacity up to 10 litres

AHP2 - Air driven hydrotest pumps - High flow
Hydraulic Equipment

AHP2 - Air driven hydrotest pumps - High flow

AHP2 series air driven hydrostatic pressure test pumps offer 5 different model options with output pressure capacities ranging from 17 Bar (246 PSI) to 1634 Bar (23700 PSI). All models feature a compact design and operate compatibly with various fluids, while incorporating a 150mm diameter glycerine filled pressure gauge, air filter, lubricator and pressure regulator, lightweight fluid reservoir, pump on/off valve, and a reinforced stainless steel protective cage. Optional stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorder with various clock speeds can be supplied. • Output pressure ranging from 17.2 to 1634.1 bar • Suitable for use with various fluids • 150 mm diameter dual scale pressure gauge • Air consumption 1.59 m³/min • Variable output pressure and flow rate • Air inlet filter, pressure regulator, lightweight oil tank standard • Optional stainless steel tank available • Optional IP65 class piston-mounted microswitch stroke counter available

ATDP - Air-driven double-acting twin hydrotest pumps
Hydraulic Equipment

ATDP - Air-driven double-acting twin hydrotest pumps

Air-driven twin double-acting ATDP series hydrotest pumps are available in 3 different models with capacities ranging from 87 bar to 1489 bar. Thanks to the twin double-acting design, the fluid volume delivered per stroke is significantly higher compared to the AHP and AHP2 series. All models feature a 150mm diameter glycerine-filled pressure gauge, air inlet filter, regulator, lubricator unit, and pump on/off valve. If the pump is to be used with special fluids or chemicals, it can be manufactured with Viton and ethylene propylene seals upon order. Seals made of different materials can be manufactured upon request. • Output pressure ranging from 87 to 1489 bar • Suitable for use with various fluids • Twin double-acting design allows high-volume flow • Air consumption: 6m³/min • Can be used with various fluids, including water • 150mm diameter dual scale pressure gauge • Variable output pressure and flow • Air inlet filter, regulator and lubricator • Optional stainless steel reservoir available, IP65 rated piston-mounted microswitch stroke counter available • Weather-resistant paint finish, pressure isolation valve

BC - Battery-powered cable lug crimping tools
Hydraulic Equipment

BC - Battery-powered cable lug crimping tools

The battery-operated lug crimping tools in the BC range include 4 models, offering either a “C” shaped jaw or a parallel guide design with a 360-degree rotating head. While providing all the versatility of the manually operated CH and SC range, this product range increases speed and offers ease of use due to battery operation. All models are supplied with a battery charger, shoulder strap, and tool storage case. In addition to the standard die sets supplied with each crimping tool as indicated, optional die sets are also available as shown in the table below. • Supplied with a standard die set • Battery status • Efficient and fast battery charging

Control/Directional valves
Hydraulic Equipment

Control/Directional valves

PMV type flow control valves are mounted on the pump. RMV type flow control valves can be mounted remotely from the pump. • Working pressure 700 bar • Can be mounted on the pump or at a different location • Manual and solenoid types are available

Digital pressure gauges
Hydraulic Equipment

Digital pressure gauges

Driven by the demand for digital gauges, Hi-Force has added the HDG1 and HDD1 digital gauges to its product range, as well as the HPT1 pressure transducer featuring the HDD1 gauge. Offering users higher accuracy (0.5% terminal point accuracy), these models represent a significant advancement compared to dial gauges with 1% accuracy. HPT1 pressure transducers also provide users with the option of remote pressure reading, which is preferred in certain applications. • Pressure measurement capability up to 1.000 Bar (14.503 PSI) • Readout in Bar, PSI, mPa, kg/cm³ units as well as other user-defined measuring units via the programmable unit • Compatible with a wide variety of fluids thanks to laser-welded stainless steel sensor and socket • Tare function, minimum and maximum memory, blue backlit display, rubber protective boot and IP67 waterproof enclosure • Minimum 2.000 hours battery life

HAP - Air-driven two-stage pumps
Hydraulic Equipment

HAP - Air-driven two-stage pumps

The HAP two-stage air-driven hydraulic power unit provides a flow rate of 10 l/min at low pressure and automatically switches down to a flow rate of 1.3 l/min at 700 bar pressure. It is driven by a 3 kW electric motor. It consumes 2.4 m³ of air per minute with a 7 bar air inlet. Pump-mounted or remotely connected valve types and oil reservoirs are available. Oil reservoirs feature drain and filler plugs. • 2-stage hydraulic pump • Powerful air motor • External, adjustable pressure relief valve • Selectable control valves • 10 l/min flow rate at low pressure (up to 70 bar) • 1.3 l/min flow rate at high pressure • Working pressure 700 bar

HCC - Hydraulic chain cutters
Hydraulic Equipment

HCC - Hydraulic chain cutters

Suitable for cutting high-tensile grade 80, 100, 120 chain and reinforced steel bars Cutting capacity between 26 mm and 46 mm diameters Equipped with an overload protection valve as standard. • Working pressure 700 bar • Spring return cylinder • Safety lock system closed over the chain during cutting • Special blade for cutting grade 100 and 120 chain on request