
Chain Slings and Accessories
Chain slings are built from Grade 80 and Grade 100 chain and work where fabric cannot — high temperature, sharp edges, abrasive environments. They are configured in one, two, three and four-leg assemblies.
Their real advantage is modularity: leg length can be adjusted on site with a shortening claw, and a single worn component can be replaced to return the sling to service. The range conforms to EN 818-4 and every assembly ships with an identification tag stating its working load limit.


VMVK - VIP multi-shortening claw with safety slider
• Can be mounted on the chain without additional components. • In accordance with DIN 5692

VRBS-FIX & VRBS RUD load ring VIP quality
Safe welded connection up to 100 tonnes! (See welding instructions) • Loadable in all directions • 4-fold safety • Suspension ring according to EN 1677 • 100% crack-tested weld blocks • Weld blocks matched to the load ring • Weld blocks and load ring are fixed by a special clamping spring for easy and fast welding • Ring stays in position • Easy painting • Safe welding process: • No corrosion underneath the weld thanks to all-round weld seam. Reduced weld volume compared to previous VRBS models • Total length and width remain the same compared to VRBS • Optimum load distribution through 2-point fixing

VRM Starpoint eye nut - VRM lifting eye
Complies with 98/37/CE Machinery Directive • The ring body of the STARPOINT nut must be rotatable by 360° when tightened. Adjust in the direction of pull before attaching the lifting means. • A flat bolting surface (E) must be ensured. The mounted stud must ensure that the seating surface of the eye nut rests flat against the bolting surface. • For rotating movements under load (e.g. turning operations), the double-ball-bearing PowerPoint series must be used. • The working load limits are valid when used in conjunction with threaded studs of a minimum quality class 10.9.

VRS Starpoint-Swivel eye bolt
With its rotating bearing bolt, the VRS-F turns in the direction of pull, making transport practical and safe To enable tool-free installation, the Starpoint eye bolt is supplied with a heat-treated Allen key (Type VRS-F). Insert the Allen key into the hexagon socket of the bolt and turn the eye bolt. Tightening and loosening is possible by hand-turning the eye bolt body. **Then remove the Allen key;** there is no risk of accidental loosening or overtightening of the eye bolt. The VRS-F ring is freely rotatable. As it aligns with the direction of force, • Rotates in the direction of pull • 4:1 safety factor • Captive internal special socket head bolt • The component is protected by patent law (other proprietary rights reserved) • Up to 5.8 times higher load capacity compared to same-sized DIN 580 eye bolts.

VSAK - VIP Special master link
Special master links with inside widths of 140 mm, 190 mm and 250 mm for large crane hooks. 1-, 2- and 3-/4-leg chain connections on request. Note: Please state the crane hook size when ordering to ensure the fit of VIP master links. A 10% clearance must be left on each side.
VWBG swivel load ring for loads of 8 tonnes and above - Swivel
Caution: not suitable for continuous rotation under load. Does not rotate more than 90° under full load. • Higher load capacity in all directions • Thread up to M150 • Pink painted surface - high temperature indicator • Easy-to-read angle indicator for the sling system • Optimum clearance to the connecting object thanks to large bottom clearance • Patented wear plate for suspension element • Inspection capability without detailed measurement thanks to dual wear indicator
VWBG-V swivel load ring up to 5000 kg - Swivelling
VWBG-V swivel eye bolts and ball-bearing bolt-on lifting points; loadable in all directions Attention: VWBG-V is not suitable for continuous rotation under load. Does not turn under full load at 90°. • Rotates 360° under load. • Wear plates in the main load directions of 45°, 60° and 90° • Can be loaded from all directions thanks to the ball bearing. • 4:1 safety factor • Embossed working load limit • Easy installation; a suitable threaded hole is sufficient • Screws 100% crack tested. • Suitable for through holes. • Variable thread length (Vario), with seal and 100% X-ray crack tested bolt • High-strength suspension link according to EN 1677-4 • Pay attention to the tightening torque in the operating manual. • Patent DE 43 36 779

WPP Weldable 360° rotating PowerPoint
• Marking indicating the nominal load capacity • 4:1 tested minimum safety factor • Rotates easily under load with double ball bearing feature • Ergonomic and practical design. • Made of CrNiMo steel, specially heat-treated • Each part is 100% crack-inspected by X-ray • Load capacity is calculated based on the smallest welding surface • Pink fluorescent powder-coated parts • Quickly pays for itself through correct and practical use, and prevents potential accidents thanks to safe lifting.

XLC Clevis self-locking hook
Allows direct connection to Grade 8 chains. (Code C)