+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Lifting Slings

Lifting slings and rigging components are essential for safely connecting loads to lifting equipment and transferring lifting forces in a controlled manner. 2M Makina, in cooperation with leading international manufacturers including KITO Crosby, RUD, Van Beest, YOKE, cromox, SpanSet and GN Rope, offers a comprehensive range of polyester webbing and round slings, Grade 80/100/120 chain slings, wire rope slings, stainless steel lifting systems, fixed and swivel lifting points, shackles, master links, lifting hooks, connecting links, swivels, wire rope sockets and other rigging fittings.

Selecting the appropriate lifting assembly requires careful consideration of working load limit (WLL), number of sling legs, lifting angles, load center of gravity, attachment point strength and operating conditions. Products are selected and supplied in accordance with applicable European standards, including EN 1492, EN 818, EN 13414 and EN 1677, depending on the equipment type. Beyond standard product supply, 2M Makina provides custom sling manufacturing, application-specific rigging solutions, load testing, certification, periodic inspections and technical services, ensuring reliable and integrated solutions for industrial lifting operations.

73 products

Subcategories

Products in this category

61–70 of 73 productsPer page102550100
▦ Grid☰ List
VIP-100 VW- VIP Balancer triangle
Lifting Slings

VIP-100 VW- VIP Balancer triangle

Our recommendation: With the VIP 2x2-leg balancer triangle, equal load distribution is achieved across all 4 legs, providing 33% higher load capacity compared to standard 4-leg slings. Higher load capacity: When using two-leg slings where a triangle (VWK 2S) is attached to one sling leg - suspended from both crane hooks - 4 load-bearing legs can be taken into account up to angles of 45° (BGR 500) with symmetrical load distribution. Use: The load capacity can be increased provided it is used at a slinging angle of no more than 10%. Since there are 4 load-bearing legs, higher weights can be lifted with the same chain. • While the upper connection of the balancer triangle is made with a shackle, • The lower connection is made with VIP connecting links or VIP shackles. • The maximum inclination angle of 10° marked on the bottom of the balancer triangle can be easily checked. • Suitable for RUD-ID-Point. • Detailed information about the VIP balancer triangle can be found in the operating instructions. • On 4-leg slings, a maximum of 3 load-bearing legs can be used. Under unfavorable conditions, 2 legs can be used.

2M
Lifting Slings

VLBS The best connection to the load

• In VIP quality • Higher load capacity compared to conventional eyebolts • Fluorescent pink powder coating • Weld-on block with marked load capacity • Internal spring for noise damping • Patented distance lugs • Optimized 90° load support • 4-fold safety in all directions • 100% crack tested

VMVK - VIP multi-shortening claw with safety slider
Lifting Slings

VMVK - VIP multi-shortening claw with safety slider

• Can be mounted on the chain without additional components. • In accordance with DIN 5692

VRBS-FIX & VRBS RUD load ring VIP quality
Lifting Slings

VRBS-FIX & VRBS RUD load ring VIP quality

Safe welded connection up to 100 tonnes! (See welding instructions) • Loadable in all directions • 4-fold safety • Suspension ring according to EN 1677 • 100% crack-tested weld blocks • Weld blocks matched to the load ring • Weld blocks and load ring are fixed by a special clamping spring for easy and fast welding • Ring stays in position • Easy painting • Safe welding process: • No corrosion underneath the weld thanks to all-round weld seam. Reduced weld volume compared to previous VRBS models • Total length and width remain the same compared to VRBS • Optimum load distribution through 2-point fixing

VRM Starpoint eye nut - VRM lifting eye
Lifting Slings

VRM Starpoint eye nut - VRM lifting eye

Complies with 98/37/CE Machinery Directive • The ring body of the STARPOINT nut must be rotatable by 360° when tightened. Adjust in the direction of pull before attaching the lifting means. • A flat bolting surface (E) must be ensured. The mounted stud must ensure that the seating surface of the eye nut rests flat against the bolting surface. • For rotating movements under load (e.g. turning operations), the double-ball-bearing PowerPoint series must be used. • The working load limits are valid when used in conjunction with threaded studs of a minimum quality class 10.9.

VRS Starpoint-Swivel eye bolt
Lifting Slings

VRS Starpoint-Swivel eye bolt

With its rotating bearing bolt, the VRS-F turns in the direction of pull, making transport practical and safe To enable tool-free installation, the Starpoint eye bolt is supplied with a heat-treated Allen key (Type VRS-F). Insert the Allen key into the hexagon socket of the bolt and turn the eye bolt. Tightening and loosening is possible by hand-turning the eye bolt body. **Then remove the Allen key;** there is no risk of accidental loosening or overtightening of the eye bolt. The VRS-F ring is freely rotatable. As it aligns with the direction of force, • Rotates in the direction of pull • 4:1 safety factor • Captive internal special socket head bolt • The component is protected by patent law (other proprietary rights reserved) • Up to 5.8 times higher load capacity compared to same-sized DIN 580 eye bolts.

VSAK - VIP Special master link
Lifting Slings

VSAK - VIP Special master link

Special master links with inside widths of 140 mm, 190 mm and 250 mm for large crane hooks. 1-, 2- and 3-/4-leg chain connections on request. Note: Please state the crane hook size when ordering to ensure the fit of VIP master links. A 10% clearance must be left on each side.

2M
Lifting Slings

VWBG swivel load ring for loads of 8 tonnes and above - Swivel

Caution: not suitable for continuous rotation under load. Does not rotate more than 90° under full load. • Higher load capacity in all directions • Thread up to M150 • Pink painted surface - high temperature indicator • Easy-to-read angle indicator for the sling system • Optimum clearance to the connecting object thanks to large bottom clearance • Patented wear plate for suspension element • Inspection capability without detailed measurement thanks to dual wear indicator