+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Wire rope and chain slings, hooks, hydraulic equipment and connectors. Pick the right product by capacity, size and certification.

211 products

Subcategories

All Products

11–20 of 211 productsPer page102550100
▦ Grid☰ List
AHP - Air-driven hydrotest pumps - Standard flow
Hydraulic Equipment

AHP - Air-driven hydrotest pumps - Standard flow

• Output pressure ranging from 6 to 2931 bar • Suitable for use with various fluids • 150 mm diameter dual-scale pressure gauge • Air consumption 0.79 m³/min • Variable output flow rate • Maximum weight 23 kg • Includes air inlet filter, pressure regulator, and lightweight oil tank • 8 different models available with pressure capacities ranging from 6 bar to 2931 bar • Optional stainless steel tank produced • Optional IP65-rated piston-mounted microswitch stroke counter available

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow
Hydraulic Equipment

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow

Hi-Force AHP-CR series air driven hydrostatic pressure test pumps are offered to users in 8 models with different capacities ranging from 6 bar (87 PSI) up to 2931 bar (42500 PSI). Fitted as standard on all pumps is a chart recorder capable of recording values on a single chart for up to 4 hours. All models are suitable for operation with various fluids including water, and feature a glycerine-filled pressure gauge, air inlet filter, lubricator and pressure regulator unit, plastic fluid reservoir, pump start/stop valve, and a reinforced stainless steel skid frame. A recorder by-pass valve and pressure release valve are fitted on the pump as standard. Optionally, a stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorders with different clock speeds can be supplied. All units have a maximum weight of 31kg. • Output pressure up to 2931 Bar • Suitable for use with various fluids • 150mm dual scale anti-vibration pressure gauge • Air consumption 28 scmf (0.79 m/min) • Infinitely variable output pressure and flow • 7 litre capacity • Supplied with 50 recording charts, 1 chart pen, with additional charts and pens available.

AHP11 - Single-Stage Air Hydraulic Pump
Hydraulic Equipment

AHP11 - Single-Stage Air Hydraulic Pump

Working pressure is 700 bar, operating with 7 bar air pressure. The compact, lightweight and powerful AHP11 single-stage air-driven hydraulic power unit is an economical and mobile (portable) alternative to manual pumps. The pump pedal is suitable for both foot and hand operation. All pumps are delivered with the oil reservoir pre-filled with oil, ensuring the pumps are ready for use immediately upon supply. • 2-way and 4-way control valve options • Internal overload safety relief valve • Oil reservoir level indicator • Standard oil reservoir capacity up to 10 litres

AHP2 - Air driven hydrotest pumps - High flow
Hydraulic Equipment

AHP2 - Air driven hydrotest pumps - High flow

AHP2 series air driven hydrostatic pressure test pumps offer 5 different model options with output pressure capacities ranging from 17 Bar (246 PSI) to 1634 Bar (23700 PSI). All models feature a compact design and operate compatibly with various fluids, while incorporating a 150mm diameter glycerine filled pressure gauge, air filter, lubricator and pressure regulator, lightweight fluid reservoir, pump on/off valve, and a reinforced stainless steel protective cage. Optional stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorder with various clock speeds can be supplied. • Output pressure ranging from 17.2 to 1634.1 bar • Suitable for use with various fluids • 150 mm diameter dual scale pressure gauge • Air consumption 1.59 m³/min • Variable output pressure and flow rate • Air inlet filter, pressure regulator, lightweight oil tank standard • Optional stainless steel tank available • Optional IP65 class piston-mounted microswitch stroke counter available

ATDP - Air-driven double-acting twin hydrotest pumps
Hydraulic Equipment

ATDP - Air-driven double-acting twin hydrotest pumps

Air-driven twin double-acting ATDP series hydrotest pumps are available in 3 different models with capacities ranging from 87 bar to 1489 bar. Thanks to the twin double-acting design, the fluid volume delivered per stroke is significantly higher compared to the AHP and AHP2 series. All models feature a 150mm diameter glycerine-filled pressure gauge, air inlet filter, regulator, lubricator unit, and pump on/off valve. If the pump is to be used with special fluids or chemicals, it can be manufactured with Viton and ethylene propylene seals upon order. Seals made of different materials can be manufactured upon request. • Output pressure ranging from 87 to 1489 bar • Suitable for use with various fluids • Twin double-acting design allows high-volume flow • Air consumption: 6m³/min • Can be used with various fluids, including water • 150mm diameter dual scale pressure gauge • Variable output pressure and flow • Air inlet filter, regulator and lubricator • Optional stainless steel reservoir available, IP65 rated piston-mounted microswitch stroke counter available • Weather-resistant paint finish, pressure isolation valve

BC - Battery-powered cable lug crimping tools
Hydraulic Equipment

BC - Battery-powered cable lug crimping tools

The battery-operated lug crimping tools in the BC range include 4 models, offering either a “C” shaped jaw or a parallel guide design with a 360-degree rotating head. While providing all the versatility of the manually operated CH and SC range, this product range increases speed and offers ease of use due to battery operation. All models are supplied with a battery charger, shoulder strap, and tool storage case. In addition to the standard die sets supplied with each crimping tool as indicated, optional die sets are also available as shown in the table below. • Supplied with a standard die set • Battery status • Efficient and fast battery charging

BRAVO
Manual Lifting Equipment

BRAVO

The Tractel lever chain hoist has proven its quality and durability through simple and safe operation. Along with its low weight and ergonomic housing, its maintenance-free use is extremely easy. The chain is released by turning the hand wheel or by pulling the unloaded chain. Under load, the pressure brake prevents unintentional lowering of the load. Special requests can be made for longer chain lengths. Call 2M. • Simple and safe operation • Free-chaining position • Standard series production with 1.5 m round link chain • Smooth operation with steel bearings • Thanks to the free-chaining handwheel, the load hook can be pulled into the desired position with a single hand movement while the directional lever is in neutral • The load is held safely during position changes of the directional lever • Easily portable anywhere thanks to its lightweight and compact design • Special forged steel swivel suspension and load hooks with safety latches, tested for 10,000 open/close cycles • Maximum load is lifted with minimum lever effort; superior mechanical efficiency • Load chain is premium-quality German RUD brand.

BUX - BM and BMP series battery-powered lifting magnets
Lifting Attachments

BUX - BM and BMP series battery-powered lifting magnets

• Built-in 12V battery provides at least 8 hours of continuous operation • Handheld infrared remote control operates the magnet from up to 5 m away • Special sensor prevents power cut-off during lifting • Release is performed by pressing two buttons to prevent accidents • Visual and audible low battery warning • If the battery level is too low, the magnet cannot be switched on • Opening cover allows easy access to the battery and control panel • Additional lift and release buttons located on the magnet • LED indicator showing battery charge level and thermal automatic circuit breaker

BW - Backup wrench
Hydraulic Equipment

BW - Backup wrench

BW series backup wrenches prevent the bolt being tightened from rotating and provide easy tightening and removal using a lever to prevent nut kickback. Once clamped, the T-Bar design adjustable reaction point remains locked until the operation is completed. • Suitable for use with TWS-N and TWH-N torque wrenches • Interchangeable hexagon links • Positive release mechanism

CH - Cable crimping tool
Hydraulic Equipment

CH - Cable crimping tool

CH series cable lug crimping tools feature C-jaw and parallel guide type options. Models with a 180° rotating head facilitate working in confined spaces. Pump units include the HP227FPC foot-operated pump set. This set also includes an elbow fitting, pressure gauge and block, and a 3-metre hydraulic hose with male coupler. All models except CH1000 include HP227FC, MB1 metal case, the selected crimping tool and its dies. In addition to the standard die sets supplied with each cable crimping tool as specified, optional die sets are also available as shown in the table below. • CH80 and CH63 models are suitable for crimping connectors up to 630 mm² cross-section • CH30, CH32 and CH40 CH-Cable crimping tools are suitable for crimping uninsulated terminals up to 400 mm² cross-section • CH1000 is suitable for crimping transmission and distribution lines up to 1000mm² cross-section • 7 different model options • Die set included with the product • CH21 model is suitable for crimping uninsulated terminals with 240 mm² cross-section • Working pressure 700 bar • Each includes a quick-connect coupler • Optional C-jaw or parallel jaw design • Easy connection option for confined spaces