+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Hydraulic Equipment

Hydraulic equipment provides powerful, safe and controlled solutions for industrial lifting, pushing, pulling, tightening, dismantling and heavy load handling operations. 2M Makina, in cooperation with specialized manufacturers including Hi-Force, Armanni, JUNG and Hydrobull, offers a comprehensive range of hydraulic cylinders, manual and powered pumps, hydraulic torque wrenches, bolt tensioning systems, pullers, flange spreaders, hydraulic cutters, machinery jacks, heavy-duty transport skates, stackers and mobile workshop cranes.

From industrial maintenance and assembly to machinery installation, precision positioning and factory relocation, selecting the appropriate equipment requires careful consideration of working pressure, load capacity, stroke length, center of gravity and operational safety. Beyond standard equipment supply, 2M Makina provides engineering expertise and technical support for high-tonnage lifting, precision positioning, controlled bolting and specialized heavy load handling applications, helping customers achieve safer and more efficient industrial operations.

87 products

Subcategories

Products in this category

26–50 of 87 productsPer page102550100
▦ Grid☰ List
HFL - Single acting lock nut short type hydraulic cylinders
Hydraulic Equipment

HFL - Single acting lock nut short type hydraulic cylinders

HFL type single acting lock nut short type cylinders combine hydraulic lifting power with the safety of mechanical load support. Ideally, HFL cylinders are used in piling and bridge/viaduct support applications where the load must be held for extended periods. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 45 mm • Single acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiter • Special seals • Standard tilting saddles • Manufactured with optional capacity and stroke upon request.

HFS - Hydraulic flange spreaders
Hydraulic Equipment

HFS - Hydraulic flange spreaders

HFS hydraulic flange spreaders ensure the safe separation of pipe flanges in the marine, oil, and gas industries. 2 models are available from 0 - 4.5 tonnes and 0 - 10 tonnes. Both models enable the user to open/spread flanges up to 92 mm thick. Hi-Force hydraulic flange spreaders can be used individually or in pairs for spreading large flanges. The use of hydraulic equipment prevents problems experienced during alternative methods, such as hammer blows causing sparks, damage to flanges, and similar hazards. • Capacities from 4.5 - 10 tonnes • Working pressure 700 bar • Supplied in a steel carrying case • Complete with manually operated pump and hose • Optional wedges in different sizes • Suitable for stud lengths up to 41 mm

HHP - Hydraulic punch
Hydraulic Equipment

HHP - Hydraulic punch

Hi-Force offers the HHP series hydraulic hole punchers with a choice of two models. Model HHP30 is supplied with a 30-tonne capacity and single-acting cylinder, and model HHP50 with a 50-tonne capacity and double-acting cylinder. Delivered in a dedicated carrying case complete with 4 punches and dies. • Punching capacity up to 50 tonnes • Throat depth 70 mm • Working pressure 700 bar

HHR - Double acting hollow hydraulic cylinders
Hydraulic Equipment

HHR - Double acting hollow hydraulic cylinders

HHR - Double acting (push/pull) hollow cylinders share the same design features as single acting HHS type cylinders, while offering additional capabilities due to their double acting operation. They provide wider application possibilities, especially in long-stroke cylinders, by substantially increasing operating speed and providing an additional pulling (retraction) force. The listed HHR cylinders are standard models and can be manufactured with different capacities and strokes upon request. • Lifting capacity from 33 to 247 tonnes • 700 bar maximum operating pressure • Stroke lengths from 51 to 305 mm • Double acting design providing separate push and pull forces • Overload relief valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston saddles • Threaded cylinder collars

HHS - Single-acting hollow hole, spring return hydraulic cylinders
Hydraulic Equipment

HHS - Single-acting hollow hole, spring return hydraulic cylinders

11 different cylinder models across 5 distinct capacities from 11 tons to 102 tons with a 700 bar working pressure HHS - Single-acting spring return hollow hole cylinders find wide application particularly in various maintenance and repair, pulling, and bolting applications. Thanks to the through-hole design, bolts/studs or cables/wire ropes can be passed through the centre for pulling and tensioning operations, and they are also utilized in pre-tensioning and pressing applications as well as testing various welded or mechanical connections. When equipped with standard piston heads (included in the set), HHS cylinders can also be used comfortably for regular lifting operations. • 11 to 102 ton lifting capacity • 700 bar maximum operating pressure • Stroke lengths from 25 to 152 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special sealing elements • Optional piston heads • Threaded cylinder collars

High pressure couplers and fittings
Hydraulic Equipment

High pressure couplers and fittings

All hydraulic pressure couplers, fittings, valves, and hoses are designed and manufactured for a maximum working pressure of 700 bar. Featuring a 4:1 safety factor, all these accessories have 3/8" - 18 NPT ports, ensuring the safe operation of your hydraulic system. All components are easily interchangeable and mutually compatible. Hi-Force recommends the use of protective dust caps to protect quick connect couplers from dust and dirt.

High-pressure hydraulic hoses
Hydraulic Equipment

High-pressure hydraulic hoses

Hi-Force high quality hydraulic hoses provide a secure connection for hydraulic equipment. Available in black and red colours. Both ends of the hose feature anti-kink handle guards. Using black hoses for advance flow connections and red hoses for return connections prevents potential misconnections. • Working pressure 700 bar • 4:1 safety factor • Custom lengths available to order

HKP - Hole puncher
Hydraulic Equipment

HKP - Hole puncher

HKP hole punchers are supplied as a set including punches and dies in all standard sizes. They include a hand pump and quick-connect coupler. They are used for punching electrical panels and metal plates during field operations. • 10 ton capacity • Spring return hydraulic cylinder • Working pressure 700 bar

HLS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HLS - Single acting spring return hydraulic cylinders

At 700 bar operating pressure, cylinders in 6 different capacities and 10 different models from 10 tons to 150 tons HLS - Short Cylinders, the cylinders with the widest field of application worldwide, provide solutions with their spring return design, short closed height, and optimum stroke lengths. Widely used in power plants, shipyards and repair-maintenance workshops, construction and railways, mining and iron-steel industries, as well as oil and gas facilities, HLS type short cylinders offer an economical and portable solution thanks to their compact and powerful construction. • Capacities from 10 to 147 tons • 700 bar maximum operating pressure • Stroke lengths from 25 to 60 mm • Spring return design

HP - Hand Pumps Steel and aluminium body
Hydraulic Equipment

HP - Hand Pumps Steel and aluminium body

All pumps are delivered with the oil tank filled with oil, making the pumps ready for use immediately upon supply. Various pump models are available for use with single- and double-acting cylinders. HP-class pumps are most commonly utilized when completely independent and mobile (portable) pumps are required. hydraulic equipment • Single- and two-speed pumps • 700 bar working pressure • 13 different models, single- and double-acting • Metal construction • Oil capacity from 1 litre to 10 litres • 2-, 3- and 4-way control valve options • Standard pressure relief valve and overload valve • Operation with minimum handle effort • Durable all-steel construction

HPF - Workshop presses
Hydraulic Equipment

HPF - Workshop presses

• Capacities from 10 to 200 tons • 250 mm or 330 mm stroke options • Working pressure 700 bar • Adjustable work table • Pressure gauge • Different configurations available upon request • Manual, pneumatic and electric pump options

HPP - Petrol engine hydraulic power units
Hydraulic Equipment

HPP - Petrol engine hydraulic power units

• 10 l/min flow rate at low pressure (up to 700 bar) • 1.3 l/min flow rate at high pressure • Working pressure 700 bar

HPS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HPS - Single acting spring return hydraulic cylinders

Short stroke special profile hydraulic cylinders in 9 different models and 8 capacities at 700 bar working pressure HPS - Pad type short cylinders offer a very practical closed height and stroke combination. These spring return cylinders are ideal for use where minimum closed height and maximum stroke length are critical. HPS type cylinders are especially used in maintenance and repair work, steel construction, weld surface alignment, and flange spreading applications. • Capacities from 4.5 to 147 tons • 700 bar maximum operating pressure • Spring return design • Wear-resistant piston • Low-friction surfaces • Special seals

HSP - Electric driven split flow, multi-outlet pumps
Hydraulic Equipment

HSP - Electric driven split flow, multi-outlet pumps

HSP series electric driven split-flow hydraulic pumps are designed to distribute an equal volume of oil from each control valve, regardless of any variation in hydraulic pressure. In this series, various options are offered, ranging from a 2-outlet model with manual directional control valves to an 8-outlet model with electric solenoid valves. Each valve outlet is directly connected to an independent electric-driven internal piston pump. This technology allows each internal piston pump to deliver an equal volume of oil per unit time, irrespective of changes in operating pressure at each control valve outlet. With the HSP split-flow pump, large, unequally weighted loads can be lifted in a synchronized, level, and controlled manner using multiple lifting points. In the electric valve option, each valve is controlled via an electrical control box with on/off switches. Additionally, a synchronized lifting button is provided for each control valve. The maximum working pressure of all HSP pumps is 700 bar, and an adjustable relief valve is located at each outlet for easy pressure control between 70-700 bar. All system components are detailed in the following pages. Optional equipment includes a PLC-controlled synchronized lifting/lowering system capable of setting the target lifting weight, maximum tolerance between lifting points, and other fine adjustments (all controlled by a central touchscreen computer). This system offers a precise solution especially for controlled lowering operations. • Working pressure 700 Bar • Multiple outlet valve options • Precise control for synchronized lifting movement

HSS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HSS - Single acting spring return hydraulic cylinders

HSS - Multi-purpose single acting spring return cylinders find excellent application across maintenance and repair, transport, production, and manufacturing/construction sectors with a wide range of capacities, closed heights, and stroke lengths. All models feature threaded cylinder collars, and the cylinder base and piston rod ends are ready for easy mounting. • Lifting capacity from 4.5 to 109 tonnes • 700 bar maximum working pressure • Stroke lengths from 25 to 457 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special seals • Optional tilting piston saddles • Threaded cylinder collars

HSWC - Hydraulic wire rope cutters with built-in pump
Hydraulic Equipment

HSWC - Hydraulic wire rope cutters with built-in pump

Easy to transport due to its compact design. In addition to many sectors such as wire rope manufacturing, elevator manufacturing, and construction works, they are also used underwater. 3 models available. • Cutting capacity for wire ropes between 19 mm and 44 mm in diameter • Steel construction • Low-effort operation

HTWP - Torque wrench pumps
Hydraulic Equipment

HTWP - Torque wrench pumps

HTWP Series hydraulic torque wrench pumps are suitable for use with all Hi-Force torque wrench models. Highly practical with a maximum working pressure of 700 bar, an easily adjustable torque relief valve, and air or electric motor options, these torque pumps are supplied as standard with 4-meter torque wrench hoses with quick-connect couplings, a glycerine-filled pressure gauge, and a remote control pendant with a 3-meter cable. Air motor versions feature an internal filter, regulator, lubricator with pressure gauge, and an exhaust-type air cooling system. Note: Pumps with model numbers with an H suffix feature a 60 Hz motor. • 700 bar working pressure and internal overload safety valve • Manual electric or air pump options • Dual-scale glycerine-filled pressure gauge • 3-meter remote control, 4-meter hose set • Protective roll frame and carrying handles • Externally adjustable pressure control (torque relief) valve • Pendant controlled

HVL - Single-acting load return hydraulic cylinders
Hydraulic Equipment

HVL - Single-acting load return hydraulic cylinders

HVL - Low profile ultra-short cylinders provide precise lifting and adjustment in the tightest spaces with their 6 mm stroke. Particularly ideal for use in machinery and machine tool alignment, turbine and other heavy assembly operations. The bases of these load return cylinders must be fully supported during use. • Lifting capacity from 10 to 104 tonnes • 700 bar maximum operating pressure • Single-acting load return design • Wear-resistant piston • Low-friction surfaces • Special seals

Hydraulic machinery jacks
Hydraulic Equipment

Hydraulic machinery jacks

Because the lifting claws have a cradle movement in their sockets, they adapt to the load point in any type of loading, and the risk of jamming and accidents is eliminated thanks to the uniform distribution of force across the surface. • Lifting claws ensure fast lifting and lowering operations; damaged claws can be replaced easily and quickly. • Robust, swivel-out feet prevent the jack from tipping over under load • The rotatable pump operating lever bracket allows the pump lever to be turned to the desired position, enabling the jack to be used even in the most confined spaces. • With the adjustable precision release valve, lowering of the lifted load is ensured with sensitive and millimeter precision. • Safety valve protects the jack from overload. • Continuous and synchronized operation is possible when coupled with electro-hydraulic central systems. • The lifting capacity is maximum relative to the jack's extremely low tare weight.

IB - Imperial hexagon reducer bushings
Hydraulic Equipment

IB - Imperial hexagon reducer bushings

Hi-Force hexagon metric bushings are used as an easy and economical method to reduce the size of TWH-NRH cassette heads. The relevant model is determined from the table by selecting the outer AF (across flats) size and the inner AF size. When a reducer bushing is used, the wall thickness (indicated by the letter W in the table) must be added to the cassette minimum diameter value.

IS - Imperial sockets
Hydraulic Equipment

IS - Imperial sockets

hydraulic equipment Hi-Force high-quality imperial size sockets can be used with both hydraulic torque wrenches and impact wrenches. There are 47 different nut size models available with square drives ranging from 3/4" to 2 1/2". Sockets with different specifications are manufactured upon request. • Square drives in sizes from 3/4" to 2 1/2" • Up to 6 7/8" socket size • Retaining pin and safety O-ring

JAH - Aluminium body super jacks
Hydraulic Equipment

JAH - Aluminium body super jacks

These JAH and JAS series lightweight aluminium alloy jacks offer an extremely practical and portable solution with a wide range of capacities and lifting heights. Screwed or plain rams and claw lifting options make these jacks indispensable in maintenance, manufacturing, construction, and heavy-duty plant applications. • Capacities between 20 and 60 tonnes • Stroke lengths between 152 and 305 mm • Overload protection valve • Head or claw lifting functions • Manufactured from aluminium alloy (load-bearing parts made of high-grade steel) • Used in maintenance, manufacturing, construction, and heavy-duty applications

JCS & JCH - Steel compact space-saving jacks
Hydraulic Equipment

JCS & JCH - Steel compact space-saving jacks

Hi-Force JCS series compact jacks are ideal particularly for lifting and positioning operations in confined spaces. They are lightweight, easy to operate, available in steel and aluminium options, all models feature a spring-assisted return, and the piston is hard chrome plated. The pumping mechanism rotates through 360°, allowing versatile operation. The 240mm long detachable operating handle provides ease of use thanks to its compact size. Although sharing the same features and shape as the JCS model compact jacks, it provides versatility across applications thanks to its hollow piston. It is preferred for tooling, maintenance and repair work, and tensioning. Where pulling force is required, pulling can be applied by passing a threaded rod or wire rope through the hollow piston. Multi-purpose JCH compact jacks can also be easily used for lifting operations just like the JCS. • Capacities from 10 tonnes to 30 tonnes • Usable in any position • Lightweight and compact • Spring return piston • Multi-position pumping mechanism • Overload protection valve • Wear-resistant plated piston rod • Sealed hydraulic system • Aluminium and steel options • Capacities from 13 tonnes to 21 tonnes • Usable in any position • Lightweight and compact