
VIP-100 UW-PP - VIP-Universal swivels
• Rotatable under load due to ball bearing. • Patented clevis connection • Can be loaded from any direction • Only use VIP chains and components approved by RUD
Chain slings are built from Grade 80 and Grade 100 chain and work where fabric cannot — high temperature, sharp edges, abrasive environments. They are configured in one, two, three and four-leg assemblies.
Their real advantage is modularity: leg length can be adjusted on site with a shortening claw, and a single worn component can be replaced to return the sling to service. The range conforms to EN 818-4 and every assembly ships with an identification tag stating its working load limit.

• Rotatable under load due to ball bearing. • Patented clevis connection • Can be loaded from any direction • Only use VIP chains and components approved by RUD

It is extremely important to use the right hook for the job on construction sites and in your facility. Forged hooks tailored to your requirements are manufactured to order.


Permanent visual indication in the event of an overload via a permanently installed, specially calibrated control link VCG, yet easily replaceable using the VVS-V connecting link. Immediate permanent visual indication in case of overload – with specially calibrated RUD control link VCG. Do not exceed the permissible working load limit! The calibrated gap width equals the specified nominal value. • Connecting link VVS-V • Simple hammer assembly (foolproof chain connection) • Control link VCG • With indicator bars and calibrated gap width (nominal... mm) • VIP chain, link • Additional safety element (chain) via bypass connection

• VIP lifting hook with safety latch • Hook body features gauge marks for checking throat opening and wear.


Danger from electrical current is no problem with VIP-ILG! Protect your crane and yourself when welding on suspended loads. Clevis links embedded in a special plastic in the VIP-IL suspension insulate against electric current. Can be used up to 1000 Volt and max 80°C operating temperature. Here, the hoist hook or crane hook must definitely be swivel-mounted. An additional swivel is not required.

Attaching: Automatically opening and closing without pressing the lock Detaching: Only by pressing the locking pin of the VIP container hook VCH • Compatible with ISO container corners. • The container hook is equipped with a patented lock. Disengagement from the ISO corner during lifting is no longer possible. • RUD VCH-SL hooks are suitable for vertical lifting and lifting at a maximum inclination angle of 45. • Clevis connection for size 16 VIP chain.




Third-party connections, e.g. lifting points, plate clamps, etc., can be attached to the wide clevis half (A2). Link halves can be combined with each other. The safety pin remains secure and cannot be damaged. Only the matching VIP chain or overload link can be fitted non-interchangeably (A1) into the link half with the hardened pin insert.

Our recommendation: With the VIP 2x2-leg balancer triangle, equal load distribution is achieved across all 4 legs, providing 33% higher load capacity compared to standard 4-leg slings. Higher load capacity: When using two-leg slings where a triangle (VWK 2S) is attached to one sling leg - suspended from both crane hooks - 4 load-bearing legs can be taken into account up to angles of 45° (BGR 500) with symmetrical load distribution. Use: The load capacity can be increased provided it is used at a slinging angle of no more than 10%. Since there are 4 load-bearing legs, higher weights can be lifted with the same chain. • While the upper connection of the balancer triangle is made with a shackle, • The lower connection is made with VIP connecting links or VIP shackles. • The maximum inclination angle of 10° marked on the bottom of the balancer triangle can be easily checked. • Suitable for RUD-ID-Point. • Detailed information about the VIP balancer triangle can be found in the operating instructions. • On 4-leg slings, a maximum of 3 load-bearing legs can be used. Under unfavorable conditions, 2 legs can be used.

• In VIP quality • Higher load capacity compared to conventional eyebolts • Fluorescent pink powder coating • Weld-on block with marked load capacity • Internal spring for noise damping • Patented distance lugs • Optimized 90° load support • 4-fold safety in all directions • 100% crack tested


• Can be mounted on the chain without additional components. • In accordance with DIN 5692

Safe welded connection up to 100 tonnes! (See welding instructions) • Loadable in all directions • 4-fold safety • Suspension ring according to EN 1677 • 100% crack-tested weld blocks • Weld blocks matched to the load ring • Weld blocks and load ring are fixed by a special clamping spring for easy and fast welding • Ring stays in position • Easy painting • Safe welding process: • No corrosion underneath the weld thanks to all-round weld seam. Reduced weld volume compared to previous VRBS models • Total length and width remain the same compared to VRBS • Optimum load distribution through 2-point fixing

Complies with 98/37/CE Machinery Directive • The ring body of the STARPOINT nut must be rotatable by 360° when tightened. Adjust in the direction of pull before attaching the lifting means. • A flat bolting surface (E) must be ensured. The mounted stud must ensure that the seating surface of the eye nut rests flat against the bolting surface. • For rotating movements under load (e.g. turning operations), the double-ball-bearing PowerPoint series must be used. • The working load limits are valid when used in conjunction with threaded studs of a minimum quality class 10.9.

With its rotating bearing bolt, the VRS-F turns in the direction of pull, making transport practical and safe To enable tool-free installation, the Starpoint eye bolt is supplied with a heat-treated Allen key (Type VRS-F). Insert the Allen key into the hexagon socket of the bolt and turn the eye bolt. Tightening and loosening is possible by hand-turning the eye bolt body. **Then remove the Allen key;** there is no risk of accidental loosening or overtightening of the eye bolt. The VRS-F ring is freely rotatable. As it aligns with the direction of force, • Rotates in the direction of pull • 4:1 safety factor • Captive internal special socket head bolt • The component is protected by patent law (other proprietary rights reserved) • Up to 5.8 times higher load capacity compared to same-sized DIN 580 eye bolts.

Special master links with inside widths of 140 mm, 190 mm and 250 mm for large crane hooks. 1-, 2- and 3-/4-leg chain connections on request. Note: Please state the crane hook size when ordering to ensure the fit of VIP master links. A 10% clearance must be left on each side.
Caution: not suitable for continuous rotation under load. Does not rotate more than 90° under full load. • Higher load capacity in all directions • Thread up to M150 • Pink painted surface - high temperature indicator • Easy-to-read angle indicator for the sling system • Optimum clearance to the connecting object thanks to large bottom clearance • Patented wear plate for suspension element • Inspection capability without detailed measurement thanks to dual wear indicator
VWBG-V swivel eye bolts and ball-bearing bolt-on lifting points; loadable in all directions Attention: VWBG-V is not suitable for continuous rotation under load. Does not turn under full load at 90°. • Rotates 360° under load. • Wear plates in the main load directions of 45°, 60° and 90° • Can be loaded from all directions thanks to the ball bearing. • 4:1 safety factor • Embossed working load limit • Easy installation; a suitable threaded hole is sufficient • Screws 100% crack tested. • Suitable for through holes. • Variable thread length (Vario), with seal and 100% X-ray crack tested bolt • High-strength suspension link according to EN 1677-4 • Pay attention to the tightening torque in the operating manual. • Patent DE 43 36 779

• Marking indicating the nominal load capacity • 4:1 tested minimum safety factor • Rotates easily under load with double ball bearing feature • Ergonomic and practical design. • Made of CrNiMo steel, specially heat-treated • Each part is 100% crack-inspected by X-ray • Load capacity is calculated based on the smallest welding surface • Pink fluorescent powder-coated parts • Quickly pays for itself through correct and practical use, and prevents potential accidents thanks to safe lifting.

Allows direct connection to Grade 8 chains. (Code C)