
Chain Slings and Accessories
Chain slings are built from Grade 80 and Grade 100 chain and work where fabric cannot — high temperature, sharp edges, abrasive environments. They are configured in one, two, three and four-leg assemblies.
Their real advantage is modularity: leg length can be adjusted on site with a shortening claw, and a single worn component can be replaced to return the sling to service. The range conforms to EN 818-4 and every assembly ships with an identification tag stating its working load limit.


VIP-100 VGIL - VIP - ILG
Danger from electrical current is no problem with VIP-ILG! Protect your crane and yourself when welding on suspended loads. Clevis links embedded in a special plastic in the VIP-IL suspension insulate against electric current. Can be used up to 1000 Volt and max 80°C operating temperature. Here, the hoist hook or crane hook must definitely be swivel-mounted. An additional swivel is not required.

VIP-100 VIP Container hook VCH-SL
Attaching: Automatically opening and closing without pressing the lock Detaching: Only by pressing the locking pin of the VIP container hook VCH • Compatible with ISO container corners. • The container hook is equipped with a patented lock. Disengagement from the ISO corner during lifting is no longer possible. • RUD VCH-SL hooks are suitable for vertical lifting and lifting at a maximum inclination angle of 45. • Clevis connection for size 16 VIP chain.




VIP-100 VVS-VIP - Connecting link
Third-party connections, e.g. lifting points, plate clamps, etc., can be attached to the wide clevis half (A2). Link halves can be combined with each other. The safety pin remains secure and cannot be damaged. Only the matching VIP chain or overload link can be fitted non-interchangeably (A1) into the link half with the hardened pin insert.

VIP-100 VW- VIP Balancer triangle
Our recommendation: With the VIP 2x2-leg balancer triangle, equal load distribution is achieved across all 4 legs, providing 33% higher load capacity compared to standard 4-leg slings. Higher load capacity: When using two-leg slings where a triangle (VWK 2S) is attached to one sling leg - suspended from both crane hooks - 4 load-bearing legs can be taken into account up to angles of 45° (BGR 500) with symmetrical load distribution. Use: The load capacity can be increased provided it is used at a slinging angle of no more than 10%. Since there are 4 load-bearing legs, higher weights can be lifted with the same chain. • While the upper connection of the balancer triangle is made with a shackle, • The lower connection is made with VIP connecting links or VIP shackles. • The maximum inclination angle of 10° marked on the bottom of the balancer triangle can be easily checked. • Suitable for RUD-ID-Point. • Detailed information about the VIP balancer triangle can be found in the operating instructions. • On 4-leg slings, a maximum of 3 load-bearing legs can be used. Under unfavorable conditions, 2 legs can be used.

VLBS The best connection to the load
• In VIP quality • Higher load capacity compared to conventional eyebolts • Fluorescent pink powder coating • Weld-on block with marked load capacity • Internal spring for noise damping • Patented distance lugs • Optimized 90° load support • 4-fold safety in all directions • 100% crack tested