+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Wire rope and chain slings, hooks, hydraulic equipment and connectors. Pick the right product by capacity, size and certification.

211 products

Subcategories

All Products

101–150 of 211 productsPer page102550100
▦ Grid☰ List
NS&HMNS - Hydraulic nut splitters
Hydraulic Equipment

NS&HMNS - Hydraulic nut splitters

NS and HMNS series hydraulic nut splitters are available in 8 different models with capacities to split hexagon nuts from 17-75 mm AF (M10 - M48). It is the ideal cold-cutting method for splitting and removing corroded nuts made of materials up to RC44 hardness in environments where removal by heating is not permitted. All NS models feature a 360° rotating connection fitting and are suitable for use in confined spaces. HMNS model nut splitters have an integrated hydraulic pump and a multi-position operating lever. All models provide easy operation on flat surfaces and flanges thanks to their angled body design. The cutting blades are manufactured from high-quality steel and can be resharpened or replaced when required. Note: NS, HMNS, and DNS nut splitters are used for heavy-duty nuts. The height of the nut must be equal to or greater than two-thirds of the blade length used. • Capacities from 10 to 75 mm AF • Working pressure 700 bar • Compact, easy to use

PKC - Versatile hydraulic puller set
Hydraulic Equipment

PKC - Versatile hydraulic puller set

The PKC heavy-duty hydraulic puller set includes 2 and 3-jaw pullers, bearing and bearing cup puller units. All models are designed for pushing, pulling, installing, and removing press-fitted or heat-fitted parts such as gears, bearings, sleeves, sprockets, inner races, wheels, final drive gears, flywheels, etc. Hydraulic components are detachable. • Operating in capacities from 10 to 50 tons • Provides 4 different pulling configurations in one set • Quick setup, easy to use • Operating pressure 700 bar • Supplied with a complete hydraulic set (including pressure gauge) • High-quality hot-forged steel jaws supplied in a carrying case.

PKS - 2-3 Leg hydraulic puller set
Hydraulic Equipment

PKS - 2-3 Leg hydraulic puller set

PKS heavy-duty hydraulic pullers are used for removing hard-to-dismantle components such as wheels, gears, sprockets, pulleys, sleeves, etc. by pulling. 8 different models are available in capacities up to 50 tons. All models come with detachable hydraulic sets. All models feature fast, safe, and easy operation; there is no need for heating the component or hammering prior to the operation. Note: PK202, PK302 and PK502 are 2-leg and are not complete sets. • Capable of operating in capacities from 4.5 to 50 tons • Quick to set up, easy to use • Manufactured with legs made of high quality hot forged steel. • Working pressure 700 bar • Multi-purpose hollow piston (except model PKS5-2-3) • Complete with full hydraulic set (pump, cylinder, hose, pressure gauge...) • In carrying case

Pressure Gauges
Hydraulic Equipment

Pressure Gauges

Hydraulic pressure gauges with a clear, precise dual scale act as a window into the system for you. We recommend using a pressure gauge so that you can continuously monitor the system. All pressure gauges are manufactured in accordance with BS EN 837-1 and operate with ±1% accuracy of full scale. Always use the pressure gauge and adaptor suitable for the original system and your application. Calibration certificate is provided upon request.

Round and flat curbstone clamp
Lifting Attachments

Round and flat curbstone clamp

Manually adjustable or fixed curb clamp for curbstones or similar materials and round parts. A clamping force directly proportional to the load is generated through the high-alloy steel construction, and the load must be resistant to the pressure resulting from this clamping force. The load's center of gravity must be centered. Two clamps must be used for long parts. • Extra large gripping arms providing easy grip • Adjustment is made via latch (on adjustable models) • Simple jaw design (provides a minimum friction coefficient of 0.4 μ) • Secutex impact-protection jaws (jaw opening reduced by 20 mm)

RSG&RSD - Heavy-duty load skates
Hydraulic Equipment

RSG&RSD - Heavy-duty load skates

RSG series heavy-duty skates offer an ideal solution for moving loads such as transformers, generators, turbines and machinery. Available in capacities from 15 to 100 tons. • 40 to 400 tons capacity per skate • Heavy-duty construction and load-bearing center plate • Special chrome alloy heat-treated chain system • All models feature 4 bolt holes on the top plate • Ideal for use on rails and long-distance transport. • RSD heavy-duty channeled skates feature double-row revolving rollers.

RSH - Heavy-duty load moving skates
Hydraulic Equipment

RSH - Heavy-duty load moving skates

RSH series heavy-duty skates provide an ideal solution for moving loads such as transformers, generators, turbines, and machinery. Available in capacities from 15 to 85 tons.

RSN - Multipurpose load skates (machinery skates)
Hydraulic Equipment

RSN - Multipurpose load skates (machinery skates)

RSN industrial low-profile skates are ideal for moving medium-weight loads in construction, mining, and the steel industry. With capacities of up to 80 tonnes, these skates can easily move heavy and irregularly shaped loads and are more economical than other lifting equipment. Optional accessories such as turntables and lifting plates can be purchased with RSN skates. • 10 - 80 tonnes capacity • Low-profile construction • Swivel corner accessories

SBT - Spring return bolt tensioners-Imperial
Hydraulic Equipment

SBT - Spring return bolt tensioners-Imperial

Note: Weight is for load cell and bridge only. Total weight of complete assembly depends on puller size and nut rotating socket selected. Tommy bar is not included. Hi-Force recommends one tommy bar for every 4 tensioners.

SC - Cable lug crimping tools with integral pump
Hydraulic Equipment

SC - Cable lug crimping tools with integral pump

SC series cable crimping tools feature C-jaw or parallel guide type options. All models are equipped with an automatic pressure relief valve. A standard die set and carrying case are supplied with the product. Models with a 180° rotating head facilitate work in confined spaces. In addition to the standard die sets supplied with each cable crimper as specified, optional die sets are also available as shown in the table below. • Model SC21 is suitable for crimping connectors with a cross-section of 240 mm² • Models SC30, SC32 and SC40 are suitable for crimping connectors with a cross-section of 400 mm² • Model SC60 is suitable for crimping non-insulated terminals with a cross-section of 400 mm² • Model SC18X is suitable for crimping non-insulated terminals with a cross-section of 185 mm² • Each includes a quick coupler connection • Optional C-jaw or parallel jaw design • Easy connection option for confined spaces

SCP - Self-contained hydraulic pullers
Hydraulic Equipment

SCP - Self-contained hydraulic pullers

With capacities from 10 - 30 tonnes, capable of operating in any position with a closed hydraulic system, they are used without the need for an external pump to dismantle press-fitted parts, wheels, gears, sprockets, pulleys, and many other components. 3 different model options are available. All models feature an integrated manual pump and a multi-position pump handle. Each unit is supplied with a safety cover against dust generated during application.

SJS - Stepped jaw hydraulic spreaders
Hydraulic Equipment

SJS - Stepped jaw hydraulic spreaders

The Hi-Force SJS10 hydraulic spreader offers the ideal solution for wedging, prising and spreading operations in a wide variety of industrial applications. The compact, lightweight, spring assisted return hydraulic cylinder design of the SJS10 offers the user a powerful 13 tonnes spreading capacity. The low clearance jaw tips, manufactured from high strength steel, can easily fit into an 8 mm gap and can provide a total spreading distance of up to 60 mm in 5 operations using the stepped blocks supplied with the tool. Suitable for use at a maximum working pressure of 700 Bar, it is supplied complete with a female quick connect coupler for easy connection to a manually operated or powered hydraulic pump. Many applications require two spreaders operated simultaneously to ensure an even spread of a flanged joint during gasket replacement. The SJS10-TK kit offers the ideal solution and comprises two SJS10 spreaders, manual aluminium pump, control manifold, two pressure gauges and gauge blocks, and hoses. All connections are fitted with quick connect couplings and the set is supplied in a sturdy metal transport and storage case. The SJS10-M offers all the features of the SJS10 with the addition of an integral manual pump. All SJS10 & SJS10-M hydraulic spreaders are supplied with two stepped blocks (to increase spreading distance) and one stepped safety block. The SJS10-TK is supplied with two sets of stepped and safety blocks. Suitable hand pumps and accessories for use with the SJS10 can be found on previous pages. • Capacity 13 tonnes per spreader unit • Supplied with safety block & stepped block • 60mm maximum spreading distance • Single acting, spring assisted return • Compact lightweight design

STS - Bolt tensioning components-Metric
Hydraulic Equipment

STS - Bolt tensioning components-Metric

The modular design of Hi-Force SBT series spring return hydraulic tensioners enables the user to adapt an existing SBT tensioner assembly to another thread size within the tensioner group. This is achieved by purchasing individual components or a simple conversion kit. By changing the required components (see table below), Hi-Force SBT bolt tensioners provide a more economical and versatile solution. Tensioner models STS1, STS3, STS4 & STS6 are available with two different bridge sizes. Therefore, it is necessary to check whether the required thread change is possible within the bridge size (please follow the colored lines in the drawing below). Ensure all components match. DO NOT mix components with different colored lines. For a large bridge, you will need to use a long threaded puller. In this way, adequate thread engagement is guaranteed. Changes within the same color code DO NOT require changing the bridge, but changes from red to blue (or vice versa) MUST include the associated bridge. The red color corresponds to smaller bolt sizes within a tensioner group consisting of short threaded adapters, load cell, small nut rotating sockets, and tommy bar. The blue color represents larger bolt sizes. In this case, the tensioner consists of a long threaded adapter, load cell, large bridge, large nut rotating socket, and tommy bar. Do not forget to order your tommy bar when purchasing Hi-Force hydraulic tensioners. We recommend purchasing one tommy bar for every 4 hydraulic tensioners. • Used with STS Metric size spring return tensioners • Modular design • Versatile use

STS - Custom designed special type bolt tensioners
Hydraulic Equipment

STS - Custom designed special type bolt tensioners

• Custom design & tailored to your requirements • Maximum working pressure 2275 Bar • Short application time In addition to standard topside and subsea bolt tensioners, Hi-Force has the capability to manufacture tensioners to suit specific requirements. Our product design incorporates Solid Works computer technology and modern CNC machinery. We have the capability to meet all your needs. Examples of Hi-Force custom design solutions include the following: • Non-standard nut sizes and shapes requiring special bridges • Recessed nuts requiring special sockets • Stud bolts with two different thread sizes • Larger bolt sizes • Confined space applications • Systems with different working pressures • Bridges with increased load-bearing area

STS - Hydraulic bolt tensioners - Imperial
Hydraulic Equipment

STS - Hydraulic bolt tensioners - Imperial

The imperial-sized STS bolt tensioner range is designed for topside operations covering a wide variety of applications. These applications include pipeline flanges, heat exchangers, pressure vessels, compressor covers, boiler feed pumps, anchor bolts, and many others. The product range includes 26 imperial size options covering thread sizes from M16 to M100. All models are suitable for a maximum working pressure of 1500 Bar. All 6 models of hydraulic tensioners can be used with various threaded pullers and nut rotating sockets; this means that the maximum possible bolt size coverage can be achieved using a minimum number of hydraulic cylinders. Threaded pullers and nut rotating sockets are available individually. All Hi-Force hydraulic bolt tensioners are designed and manufactured with a coated piston, maximum stroke indicator, self-energising high-pressure seals, and dual quick-connect couplings for easy connection of multiple tensioners, providing user-friendly operation and maintenance. Manual or air-driven hydraulic pumps, high-pressure hoses, and fittings suitable for use with Hi-Force bolt tensioners can be selected from the relevant pages. The STS range tensioners are load return tensioners. STB type spring return tensioners can be found on the preceding pages. Note: The weight values given in the table apply only to the load cell and bridge. The total system weight varies depending on the dimensions of the puller and nut rotating socket. • Capacities from 234 to 2649 kN • Working pressure 1500 Bar • Single-acting design • Nitro-carburised piston • Maximum piston stroke indicator • Suitable for single or multi-tensioning operations • Custom design tensioners manufactured upon request • User-friendly operation and maintenance • Manual or air-driven pump options are available • Bolt sizes range from ¾” to 4” • Modular design for optimum versatility • Dual quick-connect couplings for easy connection

2M
Hydraulic Equipment

STS - Hydraulic bolt tensioners - Metric

The STS metric bolt tensioner range is designed for topside operations covering a wide variety of applications. These applications include pipeline flanges, heat exchangers, pressure vessels, compressor covers, boiler feed pumps, anchor bolts, and many others. The product range includes 26 metric size options ranging from M16 to M100 thread sizes. All models are suitable for a maximum working pressure of 1500 Bar. All 6 models of hydraulic tensioners can be used with various threaded pullers and nut rotating sockets, allowing maximum bolt size coverage using a minimum number of hydraulic cylinders. Threaded pullers and nut rotating sockets are available individually. All Hi-Force hydraulic bolt tensioners are designed and manufactured with a coated piston, maximum stroke indicator, self-energising high-pressure seals, and dual quick-connect couplings for easy connection of multiple tensioners, offering user-friendly operation and maintenance. Suitable manual or air-driven hydraulic pumps, high-pressure hoses, and fittings for use with Hi-Force bolt tensioners can be selected from the relevant pages. Note: Weight values given in the table are for the load cell and bridge only. Total system weight varies depending on puller and rotating socket dimensions. • Capacities from 234 to 2649 kN • Working pressure 1500 Bar • Single-acting design • Nitro-carburised piston • Maximum piston stroke indicator • Suitable for single or multi-tensioning operations • Custom-designed tensioners manufactured on request • User-friendly operation and maintenance • Manual or air-operated pump options available.

STU - Subsea bolt tensioners
Hydraulic Equipment

STU - Subsea bolt tensioners

Hi-Force STU series subsea bolt tensioners are designed for use by divers working in harsh subsea conditions. Thanks to their two-piece construction, they feature quick assembly and disassembly. • Working pressure: 1500Bar • Two-piece, easy-to-use design • Available in imperial and metric sizes • Two hose connections for easy hanging with a hook • Extra-long piston stroke to save resetting time • Single-acting design, reliable stroke limit mechanism • Corrosion-protected for subsea applications

SZ-SSL Fork protector for heavy loads
Load Securing

SZ-SSL Fork protector for heavy loads

The Secutex heavy-duty fork protector is practically fitted to forklift forks by hand. The fork protector is delivered completely coated with a secutex polyurethane derivative on a U-profile.

TAWI VacuEasylift
Lifting Attachments

TAWI VacuEasylift

Special Atex-certified TAWI vacuum lifting products are available for flammable and explosive environments. VacuEasylift is an original vacuum lifting system that lifts, lowers, rotates, and turns loads under continuous vacuum. Under heavy working conditions, it allows the operator to perform manual lifting and transferring operations effortlessly and without health risks. VacuEasylift is a manual vacuum lifting system suitable for almost any type of load. It is available in 10 different models for boxes and sacks, sheets, panels, crates, bales, drums, and loads weighing up to a maximum of 270 kg. For gripping and lifting loads, vacuum lifting, lowering, and releasing operations are carried out using the same control handle under a highly steady and rapid working pace. Designed according to a unique operating principle, VacuEasylift was introduced to the market after an extensive development process with input from customers and VacuEasylift users to achieve simpler, safer, and more efficient lifting operations. Enabling operations that previously required two operators to be carried out by a single operator thanks to VacuEasylift ensures your investment pays for itself in a short time. In addition, VacuEasylift delivers a comprehensive combination of efficiency, ergonomics, and economy unmatched by any other lifting system. VacuEasylift models can be suspended from Lyftman jib and bridge crane systems made of aluminium and steel. Lift tubes in variable lengths and capacities can be suspended from jib arms and overhead travelling bridge cranes.

TPA/TPE - Torque wrench pumps - Premium series
Hydraulic Equipment

TPA/TPE - Torque wrench pumps - Premium series

Hi-Force TPA & TPE Premium torque wrench pump range offers the following features: Optional extras include a software-controlled pump unit that allows the user to select the hydraulic torque wrench via the digital display and view torque values (in Nm or Lbf.ft) on the digital display. All Hi-Force TWS-N and TWH-N hydraulic torque wrenches are pre-programmed as standard and can also be individually selected. Optional manifold for simultaneous operation of multiple torque wrenches (one set fitted as standard): • High-flow 3-stage pump unit • Air or electric power options • Durable, compact and lightweight • High speed 3-stage, 8-piston pump unit • Multi-outlet 4-way split block for simultaneous operation of up to 4 hydraulic wrenches • Compact design, housed inside a robust protective carrying frame • Automatically activated oil cooler heat exchanger fitted as standard on all electric driven models • Air driven models feature an exhaust air radiator cooling system • Adjustable torque setting pressure relief valve with locking nut • Models with suffix "A" feature an analogue pressure gauge • Models with suffix "D" feature a pressure transducer and digital pressure gauge • Torque controlled manual selection with auto-retract or fully automatic cycle operation (auto cycle functions only available on electric driven models) • Solenoid valve with pendant control, incorporates motor on/off switch and 5 metre cable • Maximum working pressure 700 Bar • Internally mounted oil cooling system • Multi-outlet block for simultaneous operation of 4 wrenches

TWG - Manual torque multipliers
Hydraulic Equipment

TWG - Manual torque multipliers

The Hi-Force TWG range of mechanical torque multipliers offers an output torque capacity ranging from 50 to 10000 Nm, with gearbox multiplication ratios from 1:4 to 1:28.5. 6 models are available, each housed in a high-performance aluminium casing. All models are ideal for use in bolting applications across many industries, including oil & gas, construction, railways, shipbuilding, machinery & plant engineering, and heavy vehicle workshops. Models TWG40, TWG60 and TWG100 are equipped with a ratchet mechanism and overload safety mechanism to enhance gear protection. All models can be supplied with an offset reaction bar and suitable Hi-Force torque wrenches. Details of the TWG torque multipliers are provided in the following pages of this catalogue. • Maximum torque capacity 10000 Nm • Lightweight aluminium housing • Supplied with reaction arm • Single-stage gearing on models up to 2800 Nm • Compact two-stage gearing on models up to 10000 Nm • Output square drive size ¾", 1" and 1½"

TWH-N - Hydraulic torque wrenches-Drive cylinders
Hydraulic Equipment

TWH-N - Hydraulic torque wrenches-Drive cylinders

Hi-Force TWH-N series female hexagon drive torque wrenches comprise 5 models. Output capacities range from 2625 Nm to 48181 Nm. The drive cylinder body is manufactured from high-grade alloy aluminium (except TWH430N). Ratchet link replacement is easily performed with a single pin. Ratchet links are available in both metric sizes (from 24mm to 175mm) and imperial sizes (from 1 1/16" to 6 7/8"). Hexagon reducer bushes are also available. • Working pressure 700 bar • Robust and compact design • 360° swivel hose connection inlet on both axes • ±3% accuracy with standard torque chart data • Suitable for continuous operation at maximum pressure

TWH-N - Square drive conversion kit
Hydraulic Equipment

TWH-N - Square drive conversion kit

The Hi-Force SDC square drive conversion kit is compatible with all TWH-N series models except the TWH430N model. All imperial and metric models feature a detachable reaction foot and standard hexagon sizes. Compatible with commonly used ratchet heads. It is the most economical and effective solution for converting female hexagon cassettes to square drive. • Suitable for TWH-N models up to 23124 Nm • Square drive sizes from 1" to 2" • Easy assembly without the need for special tools • Includes reaction foot

TWH-NRH - Hydraulic torque wrenches - Hexagon ratchet heads
Hydraulic Equipment

TWH-NRH - Hydraulic torque wrenches - Hexagon ratchet heads

Hi-Force TWH-NRH model imperial hexagon ratchet heads are available with AF sizes from 1 1/8" to 6 7/8" (24 mm to 175 mm) for TWH-N series hydraulic torque wrenches. Manufactured from high-quality steel. All models allow easy operation in hard-to-reach areas thanks to their low-profile design combined with a minimum nose radius. Various reducer inserts for hexagon cassettes provide versatile applications across different areas. • Standard metric and imperial size options • Easy fitting to TWH-N drive units • Durable steel construction • Non-standard special cassette sizes available on request.

TWM-HTW - Manual torque wrench
Hydraulic Equipment

TWM-HTW - Manual torque wrench

HTW series industrial manual torque wrenches are available in 6 models with capacities ranging from 8 to 1500 Nm (5 - 1000 lbf.ft). Square drives in various inch sizes are available depending on the model. Each product has its own serial number and comes with a calibration certificate. Push-through square drives allow the torque wrenches to be used in both directions. The built-in locking mechanism on HTW-R models prevents accidental alteration of the preset torque value during operation. When the target torque value is reached, the latch mechanism engages. HTW-B type torque wrenches with a breaking handle enable working at wide angles. • Torque capacity up to 1500 Nm • Consistent, error-free measurement • Dual-scale dial (Nm and lbf.ft.) • Heavy-duty ratchet gear • ±3% accuracy on HTW-R models • ±4% accuracy on HTW-B models • Square drive connection • Calibration certified • Supplied with carrying case

TWS-N - Hexagon Allen adapter drive
Hydraulic Equipment

TWS-N - Hexagon Allen adapter drive

Adapters in all sizes are available for all TWS-N torque wrenches. Note the limitation on applied torque when used with an adapter (check before use). Suitable for tightening and loosening applications.

TWS-N - Square drive hydraulic torque wrench
Hydraulic Equipment

TWS-N - Square drive hydraulic torque wrench

Hi-Force TWS-N series lightweight, alloy aluminium body square drive torque wrenches enable even the most demanding bolting operations to be performed quickly. All models feature an accuracy of ±3%, with a torque/pressure chart located on each tool. Thanks to the integrated adjustable reaction arm, the appropriate position is easily determined to begin operation. The square drive allows quick socket attachment and removal, as well as fitting and removing additional accessories when required. An adaptor for hexagon drive use is also optionally available. • Working pressure 700 bar • Compact, lightweight aluminium body • 360° rotating hose connection inlet

Ultra-large size impact wrench
Hydraulic Equipment

Ultra-large size impact wrench

Excellent performance in nut tightening/loosening • Heavy machinery and maintenance work • Shipbuilding and steel construction work

2M
Hydraulic Equipment

Ultra-lightweight N-Model impact wrenches -Pro series-

• Highly effective noise-reducing structure • High-visibility resin protector • Levers for best results

W Series Electric Chain Hoist — Type CM / CE
Crane Technology

W Series Electric Chain Hoist — Type CM / CE

Electric motor-driven hoists in the RWM W series are designated as type CE. CM is the chain-driven electric hoist model. RWM hoists feature IP54 protection class as standard. It provides indoor and outdoor protection against dust and a certain amount of water ingress from all directions.

W Series Electric Chain Hoist — Type F / CS
Crane Technology

W Series Electric Chain Hoist — Type F / CS

There are four models in the W series electric hoists. Of these, the F type is manufactured as stationary suspension without a trolley. The CS type refers to the manual trolley model. RWM hoists have an IP54 protection class as standard. It provides indoor and outdoor protection against dust and water ingress from all directions.

2M
Lifting Attachments

We make plate handling and turning easy

Thanks to Walmag plate lifting and turning magnets, you can lift and transport plates in a horizontal position and use them by turning 90°. When lifting plates from a stack, the magnet's feature allows you to lift plates individually or in multiples. Safe handling is ensured thanks to the safety on/off lever, turning bar, and suspension eye. • Telescopic lifting arm suitable for turning plates 90° • Convenient structure providing horizontal lifting and turning for drilling and beveling • Suitable for plates of various sizes • Lifting arm is compatible with all NEO type magnets.

2M
Manual Lifting Equipment

Worm gear winches Operate in all weather conditions

If you need different console-type winches (e.g. stainless steel), contact 2M. • Used for lifting and pulling. • Floor- or wall-mounted. • Industry • Theatre (stage-scenery) • Water treatment & retention facilities • Barges and trailers • Suspension applications • High safety is ensured by worm gear and automatic braking system. • Gear wheel spring is made of stainless steel. • Mechanical parts are machined and cataphoresis-coated. • Mechanical parts are enclosed in a metal housing. • Using the drum release (except VS 250) allows quick unwinding of the wire rope from the drum. Must not be operated under load. • Equipped with a crank handle adjustment knob.

WR Series Electric Chain Hoist — CE Model
Crane Technology

WR Series Electric Chain Hoist — CE Model

The RWM WR series CE model electric trolley hoist is available in various capacities and speeds from 1000kg to 5000kg. As standard, these hoists feature an IP55 protection class and a water- and dust-resistant housing. It can be upgraded to IP65 protection class upon request. As with all WR series electric hoists, the CE model is manufactured in accordance with the FEM 2M duty class.

WR Series Electric Chain Hoist — CS Model
Crane Technology

WR Series Electric Chain Hoist — CS Model

The CS model with manual trolley of the RWM WR series electric hoist features various capacities and speeds from 1000 kg to 5000 kg. As standard, these hoists have an IP55 protection class and a water- and dust-resistant body. They can optionally be upgraded to IP65 protection class.

WR Series Electric Chain Hoist — F Model
Crane Technology

WR Series Electric Chain Hoist — F Model

The trolley-less F model electric hoist of the RWM WR series features various capacities and speeds from 1000kg to 5000kg. As standard, these hoists have an IP55 protection class and a water- and dust-resistant body. It can be upgraded to IP65 protection class upon request.

XHC - Bolt tensioning hoses and ST couplings
Hydraulic Equipment

XHC - Bolt tensioning hoses and ST couplings

Each hose is fitted with quick-connect couplings (male / female) at both ends. Available in 4 standard lengths and also manufactured in different lengths upon request. Spare couplings, nipples and seals are sold separately. • Safety factor 3:1 • Working pressure up to 1500 bar

XHP - Manual pumps for bolt tensioners
Hydraulic Equipment

XHP - Manual pumps for bolt tensioners

The Hi-Force XHP series manual high-pressure hydraulic pump is compatible with STS and STU series bolt tensioners. It has a lightweight and compact design and requires no power source. It features a pressure gauge and the outlet port is of the quick-disconnect type. • Compact and lightweight design • With pressure gauge • Working pressure 1500Bar

SpanSet Liftfix HB lifting slings
Lifting Slings

SpanSet Liftfix HB lifting slings

• Color-coded according to Euro-Norm • Reinforced lifting eye • In accordance with standard EN 1492-1 • Quality controlled

SpanSet PowerSTAR High-performance lifting sling
Lifting Slings

SpanSet PowerSTAR High-performance lifting sling

NEW: NoCut Sleeve and NoCut pad made of high-performance fiber - High-tech cut protection sleeves, see following pages. PowerStar lifting slings are manufactured from robust PES yarns. The woven structure ensures that the polyester sling conforms well to the lifting surface, thereby subjecting the surface to less pressure. A transparent PU coating provides up to 3 times more protection against abrasion. Lifting straps are made even more robust thanks to integrated edge protection: High-tech yarns that provide high abrasion resistance are woven into the outer edges of the straps. The eyes of the lifting sling are subjected to greater wear. The solution: sling eye reinforcement made of high-strength yarn. Thanks to the robust fiber layer of the load-bearing weave, abrasion resistance is increased manifold. Lifting slings are generally attached directly to the load. Another frequently used application is choke hitching, which prevents the load from slipping. D-shaped sling eyes match the width of the sling and therefore significantly reduce wear during choke hitching. The eyes fit the hook optimally. SpanSet quality lifting slings are equipped with a protected, abrasion-resistant label for an optionally integrated RFID chip. This enables electronic identification, management of lifting equipment, and time savings during inspections. For added application safety, the load capacity is stitched onto the webbing on all lifting slings. This ensures that the load capacity remains legible even under heavy soiling. Available with 15 - 40 t lifting capacity upon request. See following pages. Order example: Working length PD.0100.08 10000 kg load capacity, 8m working length. Sling fittings may vary in color from the catalogue.

SpanSet Liftfix-RS Round slings
Lifting Slings

SpanSet Liftfix-RS Round slings

• Fixed color coding in accordance with European standards • Reinforced sling sleeve • Manufactured in accordance with EN 1492-2 standards • Tested German quality

SpanSet Supra Plus round sling
Lifting Slings

SpanSet Supra Plus round sling

More compact and robust than ever SupraPlus has been manufactured compactly thanks to the special harmonization of the sleeve and load-bearing core fibers. At the same capacity, the new SupraPlus is up to 25% slimmer than before. The most important advantage: It is not crushed in small crane hooks in a way that reduces working load capacity. Furthermore, this makes it easier to attach to the load and allows for more applications. Two key features make SupraPlus particularly durable: 1. Textile wire woven into the outer sleeve and a special tear-resistant rib profile. 2. First-time use of high-tenacity polyester on the outer surface. This makes the already durable outer sleeve material even more robust. In this way, the new SupraPlus withstands adverse conditions much better. Another advantage of this special weave: Cut resistance is far higher than before. An unalterably coded RFID chip can optionally be applied to these slings. It is integrated into the label to prevent damage or loss. The RFID chip is fully compatible with the IDXpert electronic product management and identification system. You can find more information on the previous pages. If a lifting accessory does not have a label, it must not be used. To prevent this, the label has been incorporated into the round sling sleeve and additionally covered with a transparent protective sleeve. This label is also tear-resistant and robust, ready to be equipped with an RFID transponder and UDXpert. In this way, long-term use and data logging are ensured. To help you select the right sling, the load capacity is prominently woven into the sleeve of the new SupraPlus in addition to the label. Even in cases of extreme soiling, the capacity remains legible. To ensure you always select the right sling, the load capacity is prominently woven into the sleeve of the new SupraPlus—in addition to the label. CE Order example: Enter working length! SP.040.05.0 SupraPlus 4000 kg load capacity, 5 m working length Round slings according to EN 1492-2 Particularly robust and wear-resistant Abrasion-resistant label with fastening strap for IDX Woven load capacity lettering

SpanSet Joker Hook
Lifting Slings

SpanSet Joker Hook

You have round slings or webbing slings, but cannot lift the load. We solve the problem with Joker hooks. Quite simply, attach the round sling or webbing slings to the Joker hook without any tools. Then attach the sling to the load's attachment point with the Joker hook. Thus, foolproof Joker hooks ensure safe, efficient, and compatible work. Joker hooks are manufactured from extra quality (Grade 8+) forged steel, are very robust, and feature a safety latch likewise made of forged steel. This always ensures a safe suspension method at the attachment point as well. on hand as spares is recommended. Joker hooks provide an ideal match for webbing slings and round slings. Having the load capacity clearly and indelibly marked on Joker polyester sling hooks is a great convenience. This means the yellow hook is attached to the yellow sling, green to green, violet to violet, etc... Until now, special lifting slings were generally required for lifting certain loads. This expensive procurement method can largely be eliminated by using the "Joker". For this reason, keeping a few "Joker" hooks as spares Joining two polyester slings together is also easily achieved with the Joker hook without causing any loss in capacity.

Single-leg round sling assemblies
Lifting Slings

Single-leg round sling assemblies

If you have fixed attachment points on your load, you can easily select the correct lifting gear. The round sling easily adapts to all conditions. It is completely safe, especially for expensive machinery, custom-made parts, or products. In SpanSet round slings, textile lifting gear is combined with high-quality forged fittings. The high-strength connecting elements are tested according to prEN 1677 and Grade 8. The round slings are manufactured accordingly. In this way, dangerous load points are eliminated. This combination has a load capacity of up to 30 tonnes. The hooks for round slings are made of high-quality forged steel. The alloy used features a compact structure with a high and optimum throat opening. This makes lifting operations extremely convenient. If parts become damaged, you do not need to replace the entire sling. Thanks to the proven modular system, you can replace each part individually, whether it is the round sling, connecting component, or hook. This saves material and ensures you always work safely. • According to EN 1492-2 • Ideal combination with attachment points • Durable mechanism according to EN 1677

Two-leg round sling assemblies
Lifting Slings

Two-leg round sling assemblies

Here, the SpanSet round sling is encased in an additional protective sleeve for a longer service life. The sleeve is tightly stitched in accordance with the EN standard and reduces abrasion. At the same time, it makes handling easier. If large loads are lifted from only one attachment point, they can easily become unbalanced and swing. This is dangerous for personnel around the load and is therefore prohibited. With a 2-leg round sling, you can ensure that the load remains balanced. This gives you better control over load movements. In addition, you benefit from the advantage of a higher lifting factor. With 2-leg slings—when the sling angle is below 45 degrees—you can achieve a capacity increase of up to 1.4 times the nominal working load limit. This allows you to move loads of up to 42 tonnes in a controlled and safe manner. Management becomes even easier with the RFID transponder for the optional IDXpert electronic information system. Order example: Working length L1 E1 LS08.04 2-leg, 8400 kg load capacity, 4m working length. Working length depends on the sling length. Suspension component colors in the catalogue may vary. • According to EN 1492-2 • Ideal combination with attachment points • Heavy-duty hardware according to EN 1677

Four-leg round sling assemblies
Lifting Slings

Four-leg round sling assemblies

If you are lifting bulky or valuable loads, you always want to maintain control over the positioning. We recommend 4-leg round slings in SpanSet quality, each manufactured to a precisely defined length to enable symmetrical lifting. Suspension from four attachment points ensures that the load does not tip over either longitudinally or transversely. At a sling angle of up to 45°, it provides a lifting capacity of up to 63 tonnes. The high-strength connecting components are manufactured in Grade 8 quality according to EN 1677. Thanks to the proven modular system, you can replace any part individually, whether it is a connecting link or a hook. This will significantly reduce maintenance costs. Observe a maximum working angle of 60° for round slings. • According to EN 1492-2 • Ideal combination with lifting points • Robust mechanism according to EN 1677

Secutex edge protection for lifting slings
Lifting Slings

Secutex edge protection for lifting slings

• Magnetic holder for easy fixing, • Protection of the load and lifting gear, • Robustness: Additional reinforcement with perforated sheet, • Easy feeding of lifting accessories, • Perfect dimensional fit when used with SpanSet lifting accessories.

Secutex-S2 Double-sided coated eye slings
Lifting Slings

Secutex-S2 Double-sided coated eye slings

Double-sided secutex coated, secutexPowerSTAR 1000 - 10000= Cut-resistant on both sides S2Power STAR lifting sling! Ordering example: Enter working length!S2.01.00.02 secutex S2 1000 kg DD sling, 2 m working length

Secutex-Secuflex thick-coated webbing slings according to EN 1492-1
Lifting Slings

Secutex-Secuflex thick-coated webbing slings according to EN 1492-1

Secuwave corrugated protective sleeve
Lifting Slings

Secuwave corrugated protective sleeve

Secuwave is a thick and corrugated protective sleeve manufactured for slings. Secuwave increases the bending radius at sharp edges, and the sharp edge does not come into contact with the protective sleeve in any way. Minimum coating thickness 5mm + wave. The wave profile of the protective sleeve provides high flexibility. Secuwave is split at the rear. After the lifting operation is completed, it is removed by pulling it off the sling.