+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Wire rope and chain slings, hooks, hydraulic equipment and connectors. Pick the right product by capacity, size and certification.

211 products

Subcategories

All Products

101–200 of 211 productsPer page102550100
▦ Grid☰ List
NS&HMNS - Hydraulic nut splitters
Hydraulic Equipment

NS&HMNS - Hydraulic nut splitters

NS and HMNS series hydraulic nut splitters are available in 8 different models with capacities to split hexagon nuts from 17-75 mm AF (M10 - M48). It is the ideal cold-cutting method for splitting and removing corroded nuts made of materials up to RC44 hardness in environments where removal by heating is not permitted. All NS models feature a 360° rotating connection fitting and are suitable for use in confined spaces. HMNS model nut splitters have an integrated hydraulic pump and a multi-position operating lever. All models provide easy operation on flat surfaces and flanges thanks to their angled body design. The cutting blades are manufactured from high-quality steel and can be resharpened or replaced when required. Note: NS, HMNS, and DNS nut splitters are used for heavy-duty nuts. The height of the nut must be equal to or greater than two-thirds of the blade length used. • Capacities from 10 to 75 mm AF • Working pressure 700 bar • Compact, easy to use

PKC - Versatile hydraulic puller set
Hydraulic Equipment

PKC - Versatile hydraulic puller set

The PKC heavy-duty hydraulic puller set includes 2 and 3-jaw pullers, bearing and bearing cup puller units. All models are designed for pushing, pulling, installing, and removing press-fitted or heat-fitted parts such as gears, bearings, sleeves, sprockets, inner races, wheels, final drive gears, flywheels, etc. Hydraulic components are detachable. • Operating in capacities from 10 to 50 tons • Provides 4 different pulling configurations in one set • Quick setup, easy to use • Operating pressure 700 bar • Supplied with a complete hydraulic set (including pressure gauge) • High-quality hot-forged steel jaws supplied in a carrying case.

PKS - 2-3 Leg hydraulic puller set
Hydraulic Equipment

PKS - 2-3 Leg hydraulic puller set

PKS heavy-duty hydraulic pullers are used for removing hard-to-dismantle components such as wheels, gears, sprockets, pulleys, sleeves, etc. by pulling. 8 different models are available in capacities up to 50 tons. All models come with detachable hydraulic sets. All models feature fast, safe, and easy operation; there is no need for heating the component or hammering prior to the operation. Note: PK202, PK302 and PK502 are 2-leg and are not complete sets. • Capable of operating in capacities from 4.5 to 50 tons • Quick to set up, easy to use • Manufactured with legs made of high quality hot forged steel. • Working pressure 700 bar • Multi-purpose hollow piston (except model PKS5-2-3) • Complete with full hydraulic set (pump, cylinder, hose, pressure gauge...) • In carrying case

Pressure Gauges
Hydraulic Equipment

Pressure Gauges

Hydraulic pressure gauges with a clear, precise dual scale act as a window into the system for you. We recommend using a pressure gauge so that you can continuously monitor the system. All pressure gauges are manufactured in accordance with BS EN 837-1 and operate with ±1% accuracy of full scale. Always use the pressure gauge and adaptor suitable for the original system and your application. Calibration certificate is provided upon request.

Round and flat curbstone clamp
Lifting Attachments

Round and flat curbstone clamp

Manually adjustable or fixed curb clamp for curbstones or similar materials and round parts. A clamping force directly proportional to the load is generated through the high-alloy steel construction, and the load must be resistant to the pressure resulting from this clamping force. The load's center of gravity must be centered. Two clamps must be used for long parts. • Extra large gripping arms providing easy grip • Adjustment is made via latch (on adjustable models) • Simple jaw design (provides a minimum friction coefficient of 0.4 μ) • Secutex impact-protection jaws (jaw opening reduced by 20 mm)

RSG&RSD - Heavy-duty load skates
Hydraulic Equipment

RSG&RSD - Heavy-duty load skates

RSG series heavy-duty skates offer an ideal solution for moving loads such as transformers, generators, turbines and machinery. Available in capacities from 15 to 100 tons. • 40 to 400 tons capacity per skate • Heavy-duty construction and load-bearing center plate • Special chrome alloy heat-treated chain system • All models feature 4 bolt holes on the top plate • Ideal for use on rails and long-distance transport. • RSD heavy-duty channeled skates feature double-row revolving rollers.

RSH - Heavy-duty load moving skates
Hydraulic Equipment

RSH - Heavy-duty load moving skates

RSH series heavy-duty skates provide an ideal solution for moving loads such as transformers, generators, turbines, and machinery. Available in capacities from 15 to 85 tons.

RSN - Multipurpose load skates (machinery skates)
Hydraulic Equipment

RSN - Multipurpose load skates (machinery skates)

RSN industrial low-profile skates are ideal for moving medium-weight loads in construction, mining, and the steel industry. With capacities of up to 80 tonnes, these skates can easily move heavy and irregularly shaped loads and are more economical than other lifting equipment. Optional accessories such as turntables and lifting plates can be purchased with RSN skates. • 10 - 80 tonnes capacity • Low-profile construction • Swivel corner accessories

SBT - Spring return bolt tensioners-Imperial
Hydraulic Equipment

SBT - Spring return bolt tensioners-Imperial

Note: Weight is for load cell and bridge only. Total weight of complete assembly depends on puller size and nut rotating socket selected. Tommy bar is not included. Hi-Force recommends one tommy bar for every 4 tensioners.

SC - Cable lug crimping tools with integral pump
Hydraulic Equipment

SC - Cable lug crimping tools with integral pump

SC series cable crimping tools feature C-jaw or parallel guide type options. All models are equipped with an automatic pressure relief valve. A standard die set and carrying case are supplied with the product. Models with a 180° rotating head facilitate work in confined spaces. In addition to the standard die sets supplied with each cable crimper as specified, optional die sets are also available as shown in the table below. • Model SC21 is suitable for crimping connectors with a cross-section of 240 mm² • Models SC30, SC32 and SC40 are suitable for crimping connectors with a cross-section of 400 mm² • Model SC60 is suitable for crimping non-insulated terminals with a cross-section of 400 mm² • Model SC18X is suitable for crimping non-insulated terminals with a cross-section of 185 mm² • Each includes a quick coupler connection • Optional C-jaw or parallel jaw design • Easy connection option for confined spaces

SCP - Self-contained hydraulic pullers
Hydraulic Equipment

SCP - Self-contained hydraulic pullers

With capacities from 10 - 30 tonnes, capable of operating in any position with a closed hydraulic system, they are used without the need for an external pump to dismantle press-fitted parts, wheels, gears, sprockets, pulleys, and many other components. 3 different model options are available. All models feature an integrated manual pump and a multi-position pump handle. Each unit is supplied with a safety cover against dust generated during application.

SJS - Stepped jaw hydraulic spreaders
Hydraulic Equipment

SJS - Stepped jaw hydraulic spreaders

The Hi-Force SJS10 hydraulic spreader offers the ideal solution for wedging, prising and spreading operations in a wide variety of industrial applications. The compact, lightweight, spring assisted return hydraulic cylinder design of the SJS10 offers the user a powerful 13 tonnes spreading capacity. The low clearance jaw tips, manufactured from high strength steel, can easily fit into an 8 mm gap and can provide a total spreading distance of up to 60 mm in 5 operations using the stepped blocks supplied with the tool. Suitable for use at a maximum working pressure of 700 Bar, it is supplied complete with a female quick connect coupler for easy connection to a manually operated or powered hydraulic pump. Many applications require two spreaders operated simultaneously to ensure an even spread of a flanged joint during gasket replacement. The SJS10-TK kit offers the ideal solution and comprises two SJS10 spreaders, manual aluminium pump, control manifold, two pressure gauges and gauge blocks, and hoses. All connections are fitted with quick connect couplings and the set is supplied in a sturdy metal transport and storage case. The SJS10-M offers all the features of the SJS10 with the addition of an integral manual pump. All SJS10 & SJS10-M hydraulic spreaders are supplied with two stepped blocks (to increase spreading distance) and one stepped safety block. The SJS10-TK is supplied with two sets of stepped and safety blocks. Suitable hand pumps and accessories for use with the SJS10 can be found on previous pages. • Capacity 13 tonnes per spreader unit • Supplied with safety block & stepped block • 60mm maximum spreading distance • Single acting, spring assisted return • Compact lightweight design

STS - Bolt tensioning components-Metric
Hydraulic Equipment

STS - Bolt tensioning components-Metric

The modular design of Hi-Force SBT series spring return hydraulic tensioners enables the user to adapt an existing SBT tensioner assembly to another thread size within the tensioner group. This is achieved by purchasing individual components or a simple conversion kit. By changing the required components (see table below), Hi-Force SBT bolt tensioners provide a more economical and versatile solution. Tensioner models STS1, STS3, STS4 & STS6 are available with two different bridge sizes. Therefore, it is necessary to check whether the required thread change is possible within the bridge size (please follow the colored lines in the drawing below). Ensure all components match. DO NOT mix components with different colored lines. For a large bridge, you will need to use a long threaded puller. In this way, adequate thread engagement is guaranteed. Changes within the same color code DO NOT require changing the bridge, but changes from red to blue (or vice versa) MUST include the associated bridge. The red color corresponds to smaller bolt sizes within a tensioner group consisting of short threaded adapters, load cell, small nut rotating sockets, and tommy bar. The blue color represents larger bolt sizes. In this case, the tensioner consists of a long threaded adapter, load cell, large bridge, large nut rotating socket, and tommy bar. Do not forget to order your tommy bar when purchasing Hi-Force hydraulic tensioners. We recommend purchasing one tommy bar for every 4 hydraulic tensioners. • Used with STS Metric size spring return tensioners • Modular design • Versatile use

STS - Custom designed special type bolt tensioners
Hydraulic Equipment

STS - Custom designed special type bolt tensioners

• Custom design & tailored to your requirements • Maximum working pressure 2275 Bar • Short application time In addition to standard topside and subsea bolt tensioners, Hi-Force has the capability to manufacture tensioners to suit specific requirements. Our product design incorporates Solid Works computer technology and modern CNC machinery. We have the capability to meet all your needs. Examples of Hi-Force custom design solutions include the following: • Non-standard nut sizes and shapes requiring special bridges • Recessed nuts requiring special sockets • Stud bolts with two different thread sizes • Larger bolt sizes • Confined space applications • Systems with different working pressures • Bridges with increased load-bearing area

STS - Hydraulic bolt tensioners - Imperial
Hydraulic Equipment

STS - Hydraulic bolt tensioners - Imperial

The imperial-sized STS bolt tensioner range is designed for topside operations covering a wide variety of applications. These applications include pipeline flanges, heat exchangers, pressure vessels, compressor covers, boiler feed pumps, anchor bolts, and many others. The product range includes 26 imperial size options covering thread sizes from M16 to M100. All models are suitable for a maximum working pressure of 1500 Bar. All 6 models of hydraulic tensioners can be used with various threaded pullers and nut rotating sockets; this means that the maximum possible bolt size coverage can be achieved using a minimum number of hydraulic cylinders. Threaded pullers and nut rotating sockets are available individually. All Hi-Force hydraulic bolt tensioners are designed and manufactured with a coated piston, maximum stroke indicator, self-energising high-pressure seals, and dual quick-connect couplings for easy connection of multiple tensioners, providing user-friendly operation and maintenance. Manual or air-driven hydraulic pumps, high-pressure hoses, and fittings suitable for use with Hi-Force bolt tensioners can be selected from the relevant pages. The STS range tensioners are load return tensioners. STB type spring return tensioners can be found on the preceding pages. Note: The weight values given in the table apply only to the load cell and bridge. The total system weight varies depending on the dimensions of the puller and nut rotating socket. • Capacities from 234 to 2649 kN • Working pressure 1500 Bar • Single-acting design • Nitro-carburised piston • Maximum piston stroke indicator • Suitable for single or multi-tensioning operations • Custom design tensioners manufactured upon request • User-friendly operation and maintenance • Manual or air-driven pump options are available • Bolt sizes range from ¾” to 4” • Modular design for optimum versatility • Dual quick-connect couplings for easy connection

2M
Hydraulic Equipment

STS - Hydraulic bolt tensioners - Metric

The STS metric bolt tensioner range is designed for topside operations covering a wide variety of applications. These applications include pipeline flanges, heat exchangers, pressure vessels, compressor covers, boiler feed pumps, anchor bolts, and many others. The product range includes 26 metric size options ranging from M16 to M100 thread sizes. All models are suitable for a maximum working pressure of 1500 Bar. All 6 models of hydraulic tensioners can be used with various threaded pullers and nut rotating sockets, allowing maximum bolt size coverage using a minimum number of hydraulic cylinders. Threaded pullers and nut rotating sockets are available individually. All Hi-Force hydraulic bolt tensioners are designed and manufactured with a coated piston, maximum stroke indicator, self-energising high-pressure seals, and dual quick-connect couplings for easy connection of multiple tensioners, offering user-friendly operation and maintenance. Suitable manual or air-driven hydraulic pumps, high-pressure hoses, and fittings for use with Hi-Force bolt tensioners can be selected from the relevant pages. Note: Weight values given in the table are for the load cell and bridge only. Total system weight varies depending on puller and rotating socket dimensions. • Capacities from 234 to 2649 kN • Working pressure 1500 Bar • Single-acting design • Nitro-carburised piston • Maximum piston stroke indicator • Suitable for single or multi-tensioning operations • Custom-designed tensioners manufactured on request • User-friendly operation and maintenance • Manual or air-operated pump options available.

STU - Subsea bolt tensioners
Hydraulic Equipment

STU - Subsea bolt tensioners

Hi-Force STU series subsea bolt tensioners are designed for use by divers working in harsh subsea conditions. Thanks to their two-piece construction, they feature quick assembly and disassembly. • Working pressure: 1500Bar • Two-piece, easy-to-use design • Available in imperial and metric sizes • Two hose connections for easy hanging with a hook • Extra-long piston stroke to save resetting time • Single-acting design, reliable stroke limit mechanism • Corrosion-protected for subsea applications

SZ-SSL Fork protector for heavy loads
Load Securing

SZ-SSL Fork protector for heavy loads

The Secutex heavy-duty fork protector is practically fitted to forklift forks by hand. The fork protector is delivered completely coated with a secutex polyurethane derivative on a U-profile.

TAWI VacuEasylift
Lifting Attachments

TAWI VacuEasylift

Special Atex-certified TAWI vacuum lifting products are available for flammable and explosive environments. VacuEasylift is an original vacuum lifting system that lifts, lowers, rotates, and turns loads under continuous vacuum. Under heavy working conditions, it allows the operator to perform manual lifting and transferring operations effortlessly and without health risks. VacuEasylift is a manual vacuum lifting system suitable for almost any type of load. It is available in 10 different models for boxes and sacks, sheets, panels, crates, bales, drums, and loads weighing up to a maximum of 270 kg. For gripping and lifting loads, vacuum lifting, lowering, and releasing operations are carried out using the same control handle under a highly steady and rapid working pace. Designed according to a unique operating principle, VacuEasylift was introduced to the market after an extensive development process with input from customers and VacuEasylift users to achieve simpler, safer, and more efficient lifting operations. Enabling operations that previously required two operators to be carried out by a single operator thanks to VacuEasylift ensures your investment pays for itself in a short time. In addition, VacuEasylift delivers a comprehensive combination of efficiency, ergonomics, and economy unmatched by any other lifting system. VacuEasylift models can be suspended from Lyftman jib and bridge crane systems made of aluminium and steel. Lift tubes in variable lengths and capacities can be suspended from jib arms and overhead travelling bridge cranes.

TPA/TPE - Torque wrench pumps - Premium series
Hydraulic Equipment

TPA/TPE - Torque wrench pumps - Premium series

Hi-Force TPA & TPE Premium torque wrench pump range offers the following features: Optional extras include a software-controlled pump unit that allows the user to select the hydraulic torque wrench via the digital display and view torque values (in Nm or Lbf.ft) on the digital display. All Hi-Force TWS-N and TWH-N hydraulic torque wrenches are pre-programmed as standard and can also be individually selected. Optional manifold for simultaneous operation of multiple torque wrenches (one set fitted as standard): • High-flow 3-stage pump unit • Air or electric power options • Durable, compact and lightweight • High speed 3-stage, 8-piston pump unit • Multi-outlet 4-way split block for simultaneous operation of up to 4 hydraulic wrenches • Compact design, housed inside a robust protective carrying frame • Automatically activated oil cooler heat exchanger fitted as standard on all electric driven models • Air driven models feature an exhaust air radiator cooling system • Adjustable torque setting pressure relief valve with locking nut • Models with suffix "A" feature an analogue pressure gauge • Models with suffix "D" feature a pressure transducer and digital pressure gauge • Torque controlled manual selection with auto-retract or fully automatic cycle operation (auto cycle functions only available on electric driven models) • Solenoid valve with pendant control, incorporates motor on/off switch and 5 metre cable • Maximum working pressure 700 Bar • Internally mounted oil cooling system • Multi-outlet block for simultaneous operation of 4 wrenches

TWG - Manual torque multipliers
Hydraulic Equipment

TWG - Manual torque multipliers

The Hi-Force TWG range of mechanical torque multipliers offers an output torque capacity ranging from 50 to 10000 Nm, with gearbox multiplication ratios from 1:4 to 1:28.5. 6 models are available, each housed in a high-performance aluminium casing. All models are ideal for use in bolting applications across many industries, including oil & gas, construction, railways, shipbuilding, machinery & plant engineering, and heavy vehicle workshops. Models TWG40, TWG60 and TWG100 are equipped with a ratchet mechanism and overload safety mechanism to enhance gear protection. All models can be supplied with an offset reaction bar and suitable Hi-Force torque wrenches. Details of the TWG torque multipliers are provided in the following pages of this catalogue. • Maximum torque capacity 10000 Nm • Lightweight aluminium housing • Supplied with reaction arm • Single-stage gearing on models up to 2800 Nm • Compact two-stage gearing on models up to 10000 Nm • Output square drive size ¾", 1" and 1½"

TWH-N - Hydraulic torque wrenches-Drive cylinders
Hydraulic Equipment

TWH-N - Hydraulic torque wrenches-Drive cylinders

Hi-Force TWH-N series female hexagon drive torque wrenches comprise 5 models. Output capacities range from 2625 Nm to 48181 Nm. The drive cylinder body is manufactured from high-grade alloy aluminium (except TWH430N). Ratchet link replacement is easily performed with a single pin. Ratchet links are available in both metric sizes (from 24mm to 175mm) and imperial sizes (from 1 1/16" to 6 7/8"). Hexagon reducer bushes are also available. • Working pressure 700 bar • Robust and compact design • 360° swivel hose connection inlet on both axes • ±3% accuracy with standard torque chart data • Suitable for continuous operation at maximum pressure

TWH-N - Square drive conversion kit
Hydraulic Equipment

TWH-N - Square drive conversion kit

The Hi-Force SDC square drive conversion kit is compatible with all TWH-N series models except the TWH430N model. All imperial and metric models feature a detachable reaction foot and standard hexagon sizes. Compatible with commonly used ratchet heads. It is the most economical and effective solution for converting female hexagon cassettes to square drive. • Suitable for TWH-N models up to 23124 Nm • Square drive sizes from 1" to 2" • Easy assembly without the need for special tools • Includes reaction foot

TWH-NRH - Hydraulic torque wrenches - Hexagon ratchet heads
Hydraulic Equipment

TWH-NRH - Hydraulic torque wrenches - Hexagon ratchet heads

Hi-Force TWH-NRH model imperial hexagon ratchet heads are available with AF sizes from 1 1/8" to 6 7/8" (24 mm to 175 mm) for TWH-N series hydraulic torque wrenches. Manufactured from high-quality steel. All models allow easy operation in hard-to-reach areas thanks to their low-profile design combined with a minimum nose radius. Various reducer inserts for hexagon cassettes provide versatile applications across different areas. • Standard metric and imperial size options • Easy fitting to TWH-N drive units • Durable steel construction • Non-standard special cassette sizes available on request.

TWM-HTW - Manual torque wrench
Hydraulic Equipment

TWM-HTW - Manual torque wrench

HTW series industrial manual torque wrenches are available in 6 models with capacities ranging from 8 to 1500 Nm (5 - 1000 lbf.ft). Square drives in various inch sizes are available depending on the model. Each product has its own serial number and comes with a calibration certificate. Push-through square drives allow the torque wrenches to be used in both directions. The built-in locking mechanism on HTW-R models prevents accidental alteration of the preset torque value during operation. When the target torque value is reached, the latch mechanism engages. HTW-B type torque wrenches with a breaking handle enable working at wide angles. • Torque capacity up to 1500 Nm • Consistent, error-free measurement • Dual-scale dial (Nm and lbf.ft.) • Heavy-duty ratchet gear • ±3% accuracy on HTW-R models • ±4% accuracy on HTW-B models • Square drive connection • Calibration certified • Supplied with carrying case

TWS-N - Hexagon Allen adapter drive
Hydraulic Equipment

TWS-N - Hexagon Allen adapter drive

Adapters in all sizes are available for all TWS-N torque wrenches. Note the limitation on applied torque when used with an adapter (check before use). Suitable for tightening and loosening applications.

TWS-N - Square drive hydraulic torque wrench
Hydraulic Equipment

TWS-N - Square drive hydraulic torque wrench

Hi-Force TWS-N series lightweight, alloy aluminium body square drive torque wrenches enable even the most demanding bolting operations to be performed quickly. All models feature an accuracy of ±3%, with a torque/pressure chart located on each tool. Thanks to the integrated adjustable reaction arm, the appropriate position is easily determined to begin operation. The square drive allows quick socket attachment and removal, as well as fitting and removing additional accessories when required. An adaptor for hexagon drive use is also optionally available. • Working pressure 700 bar • Compact, lightweight aluminium body • 360° rotating hose connection inlet

Ultra-large size impact wrench
Hydraulic Equipment

Ultra-large size impact wrench

Excellent performance in nut tightening/loosening • Heavy machinery and maintenance work • Shipbuilding and steel construction work

2M
Hydraulic Equipment

Ultra-lightweight N-Model impact wrenches -Pro series-

• Highly effective noise-reducing structure • High-visibility resin protector • Levers for best results

W Series Electric Chain Hoist — Type CM / CE
Crane Technology

W Series Electric Chain Hoist — Type CM / CE

Electric motor-driven hoists in the RWM W series are designated as type CE. CM is the chain-driven electric hoist model. RWM hoists feature IP54 protection class as standard. It provides indoor and outdoor protection against dust and a certain amount of water ingress from all directions.

W Series Electric Chain Hoist — Type F / CS
Crane Technology

W Series Electric Chain Hoist — Type F / CS

There are four models in the W series electric hoists. Of these, the F type is manufactured as stationary suspension without a trolley. The CS type refers to the manual trolley model. RWM hoists have an IP54 protection class as standard. It provides indoor and outdoor protection against dust and water ingress from all directions.

2M
Lifting Attachments

We make plate handling and turning easy

Thanks to Walmag plate lifting and turning magnets, you can lift and transport plates in a horizontal position and use them by turning 90°. When lifting plates from a stack, the magnet's feature allows you to lift plates individually or in multiples. Safe handling is ensured thanks to the safety on/off lever, turning bar, and suspension eye. • Telescopic lifting arm suitable for turning plates 90° • Convenient structure providing horizontal lifting and turning for drilling and beveling • Suitable for plates of various sizes • Lifting arm is compatible with all NEO type magnets.

2M
Manual Lifting Equipment

Worm gear winches Operate in all weather conditions

If you need different console-type winches (e.g. stainless steel), contact 2M. • Used for lifting and pulling. • Floor- or wall-mounted. • Industry • Theatre (stage-scenery) • Water treatment & retention facilities • Barges and trailers • Suspension applications • High safety is ensured by worm gear and automatic braking system. • Gear wheel spring is made of stainless steel. • Mechanical parts are machined and cataphoresis-coated. • Mechanical parts are enclosed in a metal housing. • Using the drum release (except VS 250) allows quick unwinding of the wire rope from the drum. Must not be operated under load. • Equipped with a crank handle adjustment knob.

WR Series Electric Chain Hoist — CE Model
Crane Technology

WR Series Electric Chain Hoist — CE Model

The RWM WR series CE model electric trolley hoist is available in various capacities and speeds from 1000kg to 5000kg. As standard, these hoists feature an IP55 protection class and a water- and dust-resistant housing. It can be upgraded to IP65 protection class upon request. As with all WR series electric hoists, the CE model is manufactured in accordance with the FEM 2M duty class.

WR Series Electric Chain Hoist — CS Model
Crane Technology

WR Series Electric Chain Hoist — CS Model

The CS model with manual trolley of the RWM WR series electric hoist features various capacities and speeds from 1000 kg to 5000 kg. As standard, these hoists have an IP55 protection class and a water- and dust-resistant body. They can optionally be upgraded to IP65 protection class.

WR Series Electric Chain Hoist — F Model
Crane Technology

WR Series Electric Chain Hoist — F Model

The trolley-less F model electric hoist of the RWM WR series features various capacities and speeds from 1000kg to 5000kg. As standard, these hoists have an IP55 protection class and a water- and dust-resistant body. It can be upgraded to IP65 protection class upon request.

XHC - Bolt tensioning hoses and ST couplings
Hydraulic Equipment

XHC - Bolt tensioning hoses and ST couplings

Each hose is fitted with quick-connect couplings (male / female) at both ends. Available in 4 standard lengths and also manufactured in different lengths upon request. Spare couplings, nipples and seals are sold separately. • Safety factor 3:1 • Working pressure up to 1500 bar

XHP - Manual pumps for bolt tensioners
Hydraulic Equipment

XHP - Manual pumps for bolt tensioners

The Hi-Force XHP series manual high-pressure hydraulic pump is compatible with STS and STU series bolt tensioners. It has a lightweight and compact design and requires no power source. It features a pressure gauge and the outlet port is of the quick-disconnect type. • Compact and lightweight design • With pressure gauge • Working pressure 1500Bar

SpanSet Liftfix HB lifting slings
Lifting Slings

SpanSet Liftfix HB lifting slings

• Color-coded according to Euro-Norm • Reinforced lifting eye • In accordance with standard EN 1492-1 • Quality controlled

SpanSet PowerSTAR High-performance lifting sling
Lifting Slings

SpanSet PowerSTAR High-performance lifting sling

NEW: NoCut Sleeve and NoCut pad made of high-performance fiber - High-tech cut protection sleeves, see following pages. PowerStar lifting slings are manufactured from robust PES yarns. The woven structure ensures that the polyester sling conforms well to the lifting surface, thereby subjecting the surface to less pressure. A transparent PU coating provides up to 3 times more protection against abrasion. Lifting straps are made even more robust thanks to integrated edge protection: High-tech yarns that provide high abrasion resistance are woven into the outer edges of the straps. The eyes of the lifting sling are subjected to greater wear. The solution: sling eye reinforcement made of high-strength yarn. Thanks to the robust fiber layer of the load-bearing weave, abrasion resistance is increased manifold. Lifting slings are generally attached directly to the load. Another frequently used application is choke hitching, which prevents the load from slipping. D-shaped sling eyes match the width of the sling and therefore significantly reduce wear during choke hitching. The eyes fit the hook optimally. SpanSet quality lifting slings are equipped with a protected, abrasion-resistant label for an optionally integrated RFID chip. This enables electronic identification, management of lifting equipment, and time savings during inspections. For added application safety, the load capacity is stitched onto the webbing on all lifting slings. This ensures that the load capacity remains legible even under heavy soiling. Available with 15 - 40 t lifting capacity upon request. See following pages. Order example: Working length PD.0100.08 10000 kg load capacity, 8m working length. Sling fittings may vary in color from the catalogue.

SpanSet Liftfix-RS Round slings
Lifting Slings

SpanSet Liftfix-RS Round slings

• Fixed color coding in accordance with European standards • Reinforced sling sleeve • Manufactured in accordance with EN 1492-2 standards • Tested German quality

SpanSet Supra Plus round sling
Lifting Slings

SpanSet Supra Plus round sling

More compact and robust than ever SupraPlus has been manufactured compactly thanks to the special harmonization of the sleeve and load-bearing core fibers. At the same capacity, the new SupraPlus is up to 25% slimmer than before. The most important advantage: It is not crushed in small crane hooks in a way that reduces working load capacity. Furthermore, this makes it easier to attach to the load and allows for more applications. Two key features make SupraPlus particularly durable: 1. Textile wire woven into the outer sleeve and a special tear-resistant rib profile. 2. First-time use of high-tenacity polyester on the outer surface. This makes the already durable outer sleeve material even more robust. In this way, the new SupraPlus withstands adverse conditions much better. Another advantage of this special weave: Cut resistance is far higher than before. An unalterably coded RFID chip can optionally be applied to these slings. It is integrated into the label to prevent damage or loss. The RFID chip is fully compatible with the IDXpert electronic product management and identification system. You can find more information on the previous pages. If a lifting accessory does not have a label, it must not be used. To prevent this, the label has been incorporated into the round sling sleeve and additionally covered with a transparent protective sleeve. This label is also tear-resistant and robust, ready to be equipped with an RFID transponder and UDXpert. In this way, long-term use and data logging are ensured. To help you select the right sling, the load capacity is prominently woven into the sleeve of the new SupraPlus in addition to the label. Even in cases of extreme soiling, the capacity remains legible. To ensure you always select the right sling, the load capacity is prominently woven into the sleeve of the new SupraPlus—in addition to the label. CE Order example: Enter working length! SP.040.05.0 SupraPlus 4000 kg load capacity, 5 m working length Round slings according to EN 1492-2 Particularly robust and wear-resistant Abrasion-resistant label with fastening strap for IDX Woven load capacity lettering

SpanSet Joker Hook
Lifting Slings

SpanSet Joker Hook

You have round slings or webbing slings, but cannot lift the load. We solve the problem with Joker hooks. Quite simply, attach the round sling or webbing slings to the Joker hook without any tools. Then attach the sling to the load's attachment point with the Joker hook. Thus, foolproof Joker hooks ensure safe, efficient, and compatible work. Joker hooks are manufactured from extra quality (Grade 8+) forged steel, are very robust, and feature a safety latch likewise made of forged steel. This always ensures a safe suspension method at the attachment point as well. on hand as spares is recommended. Joker hooks provide an ideal match for webbing slings and round slings. Having the load capacity clearly and indelibly marked on Joker polyester sling hooks is a great convenience. This means the yellow hook is attached to the yellow sling, green to green, violet to violet, etc... Until now, special lifting slings were generally required for lifting certain loads. This expensive procurement method can largely be eliminated by using the "Joker". For this reason, keeping a few "Joker" hooks as spares Joining two polyester slings together is also easily achieved with the Joker hook without causing any loss in capacity.

Single-leg round sling assemblies
Lifting Slings

Single-leg round sling assemblies

If you have fixed attachment points on your load, you can easily select the correct lifting gear. The round sling easily adapts to all conditions. It is completely safe, especially for expensive machinery, custom-made parts, or products. In SpanSet round slings, textile lifting gear is combined with high-quality forged fittings. The high-strength connecting elements are tested according to prEN 1677 and Grade 8. The round slings are manufactured accordingly. In this way, dangerous load points are eliminated. This combination has a load capacity of up to 30 tonnes. The hooks for round slings are made of high-quality forged steel. The alloy used features a compact structure with a high and optimum throat opening. This makes lifting operations extremely convenient. If parts become damaged, you do not need to replace the entire sling. Thanks to the proven modular system, you can replace each part individually, whether it is the round sling, connecting component, or hook. This saves material and ensures you always work safely. • According to EN 1492-2 • Ideal combination with attachment points • Durable mechanism according to EN 1677

Two-leg round sling assemblies
Lifting Slings

Two-leg round sling assemblies

Here, the SpanSet round sling is encased in an additional protective sleeve for a longer service life. The sleeve is tightly stitched in accordance with the EN standard and reduces abrasion. At the same time, it makes handling easier. If large loads are lifted from only one attachment point, they can easily become unbalanced and swing. This is dangerous for personnel around the load and is therefore prohibited. With a 2-leg round sling, you can ensure that the load remains balanced. This gives you better control over load movements. In addition, you benefit from the advantage of a higher lifting factor. With 2-leg slings—when the sling angle is below 45 degrees—you can achieve a capacity increase of up to 1.4 times the nominal working load limit. This allows you to move loads of up to 42 tonnes in a controlled and safe manner. Management becomes even easier with the RFID transponder for the optional IDXpert electronic information system. Order example: Working length L1 E1 LS08.04 2-leg, 8400 kg load capacity, 4m working length. Working length depends on the sling length. Suspension component colors in the catalogue may vary. • According to EN 1492-2 • Ideal combination with attachment points • Heavy-duty hardware according to EN 1677

Four-leg round sling assemblies
Lifting Slings

Four-leg round sling assemblies

If you are lifting bulky or valuable loads, you always want to maintain control over the positioning. We recommend 4-leg round slings in SpanSet quality, each manufactured to a precisely defined length to enable symmetrical lifting. Suspension from four attachment points ensures that the load does not tip over either longitudinally or transversely. At a sling angle of up to 45°, it provides a lifting capacity of up to 63 tonnes. The high-strength connecting components are manufactured in Grade 8 quality according to EN 1677. Thanks to the proven modular system, you can replace any part individually, whether it is a connecting link or a hook. This will significantly reduce maintenance costs. Observe a maximum working angle of 60° for round slings. • According to EN 1492-2 • Ideal combination with lifting points • Robust mechanism according to EN 1677

Secutex edge protection for lifting slings
Lifting Slings

Secutex edge protection for lifting slings

• Magnetic holder for easy fixing, • Protection of the load and lifting gear, • Robustness: Additional reinforcement with perforated sheet, • Easy feeding of lifting accessories, • Perfect dimensional fit when used with SpanSet lifting accessories.

Secutex-S2 Double-sided coated eye slings
Lifting Slings

Secutex-S2 Double-sided coated eye slings

Double-sided secutex coated, secutexPowerSTAR 1000 - 10000= Cut-resistant on both sides S2Power STAR lifting sling! Ordering example: Enter working length!S2.01.00.02 secutex S2 1000 kg DD sling, 2 m working length

Secutex-Secuflex thick-coated webbing slings according to EN 1492-1
Lifting Slings

Secutex-Secuflex thick-coated webbing slings according to EN 1492-1

Secuwave corrugated protective sleeve
Lifting Slings

Secuwave corrugated protective sleeve

Secuwave is a thick and corrugated protective sleeve manufactured for slings. Secuwave increases the bending radius at sharp edges, and the sharp edge does not come into contact with the protective sleeve in any way. Minimum coating thickness 5mm + wave. The wave profile of the protective sleeve provides high flexibility. Secuwave is split at the rear. After the lifting operation is completed, it is removed by pulling it off the sling.

Supra Plus protective sleeves
Lifting Slings

Supra Plus protective sleeves

The monofilament protective sleeve provides 70% greater tear resistance. The high-tenacity textile material woven with special yarn resists tearing and at the same time does not add unnecessary thickness to the protective sleeve. **Result:** Longer service life! Please specify the order number, length, and the type of protective sleeves. Abrasion and edge protection - sharp edges are no longer a problem.

2M
Lifting Slings

Wire rope slings Single leg

Special quality steel wire ropes guarantee safe and efficient operation. In these slings, the rope weight/load capacity ratio is extremely efficient. In addition, the attractive, economical prices of wire ropes make this type of sling even more appealing. 2M maintains a comprehensive manufacturing programme, supported by meticulously prepared equipment. Therefore, steel wire ropes can be made available economically. Supplied with manufacturer test certificate. Please request information for higher load capacities, other applications and products.

2M
Lifting Slings

Magnum Plus 100 tonnes load capacity & 60 m working length

SpanSet MagnumPlus offers all the advantages of textile slings: secure grip, optimum handling, and high resistance to wear. These heavy-duty slings feature a lifting capacity of up to 100 tonnes. Among other sling types, this lifting capacity could previously only be achieved with large-diameter wire ropes. Because heavy loads require durable equipment, the outer woven jacket of MagnumPlus is manufactured to be as narrow as possible at the edges. In this way, bunching under high load capacities is minimized, and the textile thread woven into the jacket protects the jacket fabric against abrasion. All lifting accessories in the heavy-duty class are orange. For this reason, the respective load capacity specification is visibly woven into the round sling. The indelible load capacity marking reliably indicates the load capacity even under conditions of extreme soiling. To ensure that even the heaviest loads are not left grounded, MagnumPlus is produced with working lengths of up to 60 metres and load capacities of up to 100 tonnes. Until now, loads in this weight class could only be lifted using heavy chains and wire ropes. The textile sling solution to this: MagnumPlus is exceptionally lightweight. The robust protective jacket (outer) and webbing (inner) are optimally combined in MagnumPlus. Narrow protective ribbing at the sides makes lifting loads in this class possible. In practice, the compact design ensures easier handling and less wear. NEW: NoCut®sleeve and NoCut®pad - High-tech cut protection sleeves, to be found on the following pages. Higher load capacities of 125 tonnes, 150 tonnes, and 200 tonnes are available upon request. Order example: Enter working length! MG.0400.05 MagnumPlus 40,000 kg load capacity, 5 m working length • Round slings in accordance with EN 1492-2 • Load capacity from 10 to 100 tonnes • Tear-resistant label with RFID chip • Extra robust design • Permanently legible, raised woven load capacity specification

2M
Lifting Slings

Secutex-Powerflex For a long service life and safety

Powerflex P2-coated slings are ideal for use on rough and abrasive surfaces. P2-coated slings can be used in combination with C-type choke hooks and D-type rings. Order example: Enter working length! P2.06.DD.05 secutex P2 6000 kg DD-sling, 5 m working length

VarioWeb Asymmetric load lifting 1-, 2-, and 4-leg slings
Lifting Slings

VarioWeb Asymmetric load lifting 1-, 2-, and 4-leg slings

With VarioWeb, we offer an infinitely variable length adjustment solution for webbing slings. The forged VarioWeb shortening element easily adapts to the ends of the legs. It is extremely easy to use. For length adjustment, simply pull the webbing through its slot. VarioWeb is ideal for lifting asymmetric loads: The shortening mechanism operates directly on the webbing sling. Thanks to its well-conceived mechanics, the length can be adjusted steplessly on each leg. This allows you to achieve the optimum length for any load and ensure balanced force distribution. VarioWeb fittings are manufactured from special forged steel and are therefore extremely robust. All components are engineered so that the straps seat precisely, minimizing edge friction. For greater safety and clear identification, the webbing is color-coded in accordance with EN 1492-1 to indicate load capacity. However, we can also manufacture VarioWeb straps precisely to your specifications and deliver them fully assembled. VarioWeb is flexible not only in application, but also in maintenance. If a VarioWeb strap becomes damaged, you can take advantage of the modular system: Simply replace the damaged component and continue using the rest. • Infinitely adjustable sling • For lifting asymmetric loads • Extra-robust special forged steel • Minimum wear through smart design

2M
Lifting Slings

ICE-120 Shortenable chain slings — with IMVK shortening claw

ICE chain sling, 1-leg, terminated with ICE Star hook, with IMVK shortening claw

ICE-120 Chain Slings
Lifting Slings

ICE-120 Chain Slings

Super light and ultra strong: one nominal diameter smaller than Grade 80, can be used down to -60°C.

Closed S-hook long body
Lifting Slings

Closed S-hook long body

• Closed hook eye • Long model

2M
Lifting Slings

Economical protected lifting for sharp-edged loads

2M steel mesh lifting belts feature excellent ease of handling primarily due to their low dead weight. Due to their wide contact surfaces, the lifting force is distributed over a large area. Thus, both the load and the lifting belt are protected. This steel mesh belt ensures that delicate loads are not damaged over a long service life. 2M steel mesh lifting belts are delivered in various combinations: The vulcanized coating process can be renewed at any time and is particularly environmentally friendly. Vulcanized or Secutex®-PU coated eye-type steel mesh slings. • Galvanized • Galvanized and vulcanized • PU-coated

Screw pin and bolt type shackles EN 13889
Lifting Slings

Screw pin and bolt type shackles EN 13889

• Material: Bow and pin are made of Grade 6 high tensile forged and tempered steel • Safety Factor: Min. breaking strength equals 6 x working load limit • Standard: Meets EN 13889 and US Fed.Spec. RR-C-271 performance requirements • Finish: Hot-dip galvanized • Operating Temperature: -20°C to +200°C • Certificate: Manufacturer test certificate and EC declaration of conformity are supplied free of charge.

CFO Eye foundry hook
Lifting Slings

CFO Eye foundry hook

The hook throat is designed according to standard dimensions, allowing easy entry into foundry holes.

CRC Clevis chain shortening hook
Lifting Slings

CRC Clevis chain shortening hook

Connects directly to the chain with its clevis connection feature. Does not require a connecting link. Practical to use.

2M
Lifting Slings

CSE Swivel hook

The large eye facilitates attachment to (thimbled) wire rope slings. There is also a flat section on the eye for attaching omega links (Code CO). Except for CSE 18/20, all hooks feature a bearing inside the swivel as standard.

2M
Lifting Slings

Grade 80 Chain slings

Inter-Line-Modular system - Best price option to European standards

2M
Lifting Slings

ICE-120 Master link with ICE connector

All master links are equipped with welded, all-round swivelling connectors. This prevents confusion regarding chain diameter and number of legs. The patented sling is equipped with an identification tag with an integrated chain inspection gauge. Dimensions correspond to size A master links according to EN 5688, but are one nominal diameter larger. The inside width is sufficient for attaching hooks for lifting loads.

ICE-120 IH - ICE-H-Chain connector
Lifting Slings

ICE-120 IH - ICE-H-Chain connector

• Used for fast, easy, and economical connection of chain slings. • Used for dividing chains with the H-connector. • More compact and practical than conventional chain connectors. • Features a reinforced, wear-resistant body. • Ergonomically designed. • Better gliding over edges. • Flexible; easily adapts both to the chain shape and the component.

ICE-120 IMEG - ICE container lifting ring
Lifting Slings

ICE-120 IMEG - ICE container lifting ring

• Fast, robust and user-friendly • Quick attachment without unlocking • Easy attachment and removal with ergonomically designed lock • Anti-slip shaped sliding cover • Protective surface protecting the lock cover from damage and impact • Standard chain pin according to EN 30720

ICE-120 IRG- ICE Connector
Lifting Slings

ICE-120 IRG- ICE Connector

• Supplied completely pre-assembled with ICE connecting pins and washer on master links, flanges, and similar. • ICE connectors are equipped with a RUD-ID-TAG (RFID chip) as a single piece and can be assigned a distinct identification number.

ICE-120 ISH - ICE-Star hook
Lifting Slings

ICE-120 ISH - ICE-Star hook

• Thanks to its innovative design, it is 25% lighter than Grade 8 hooks of the same load capacity. • Features a wide hook opening, just like the VIP super hooks. • The safety latch is universal across the GHS, SH, Cobra, and ICE-Star hooks of the RUD hook series and can be interchanged (pay attention to the nominal diameter) - easy spare parts procurement. • Developed based on the technology of the VIP-Cobra hook.

ICE-120 IVH - ICE- Shortening hooks
Lifting Slings

ICE-120 IVH - ICE- Shortening hooks

• No reduction in the working load limit of the ICE chain sling when used. • High dynamic strength. • Angled insertion slot prevents the chain from slipping out. • Thickened hook tip prevents improper use (inserting into the center of a chain link like a hook). • Chain groove according to DIN 5692 > 5 x nominal chain diameter. • Supplied pre-assembled with connecting pins and washer.

ICE-120 IW - ICE balancer triangle
Lifting Slings

ICE-120 IW - ICE balancer triangle

Optimum load capacity with equal load distribution Our recommendation: With ICE 2x2-leg slings with balancer triangle, load is equally distributed across all 4 legs, providing 33% higher load capacity compared to standard 4-leg slings. • Upper connection is made with a shackle, lower connection with ICE connecting links. • The special shape at the bottom of the triangle allows easy determination of a 10° inclination angle. • RUD-ID-Point included. • Detailed information on the ICE balancer can be found in the operating instructions. • In 4-leg slings, a maximum of 3 load-bearing legs may be used. Under unfavorable conditions, 2 legs may be used.

ICE-120 IWK-2S / IAK-2S - ICE master link with balancing triangle
Lifting Slings

ICE-120 IWK-2S / IAK-2S - ICE master link with balancing triangle

For use with 2-leg slings • IA link with VKZA • VIP shackle • Balancing triangle • 2 ICE connecting links

ICE-120 Shortenable chain slings — with IVH shortening claw
Lifting Slings

ICE-120 Shortenable chain slings — with IVH shortening claw

ICE chain sling, 1-leg, terminated with ICE Star hook with IVH shortening claw

INOX-Star Stainless steel bolt-on lifting point
Lifting Slings

INOX-Star Stainless steel bolt-on lifting point

• Pentagonal - clear distinction from DIN 580 eye bolt (eyebolt) • Rotatable 360°, adjustable in the direction of pull. • Clear working load limit indication for the non-permissible load range. 4:1 safety factor against breakage. • Hardened ring body • Ring body and bolt material: 14462, duplex steel • 100% crack tested • Bolt is captively mounted • Patented wear marks on the ring body

OLEC Eye-clevis ball bearing swivel
Lifting Slings

OLEC Eye-clevis ball bearing swivel

Omega link (Code: CO), pear-shaped link (Code: MP) or clevis hooks (XLC-GKC-CSC).

Stainless steel chain sling master link 316L (MS-MTS)
Lifting Slings

Stainless steel chain sling master link 316L (MS-MTS)

Welded links feature a flat section to facilitate easier connection with omega links (code COI) for 1-2 leg chain slings (code MS) and 3-4 leg chain slings (MTS).

PowerPoint series Multi-purpose use
Lifting Slings

PowerPoint series Multi-purpose use

• Loadable in all directions with 360° rotation. • Clear marking of nominal load capacity. • 4:1 tested minimum safety factor • Easily rotatable under load with double ball bearings. • Ergonomic and practical design. • Made of CrNiMo steel, specially heat-treated. • 100% crack-tested by X-ray on every part. • Load capacity calculated based on the smallest bolt size. • Threaded studs can be ordered in various lengths. • Fluorescent pink powder-coated components. • Correct and practical use allows costs to be quickly amortized, and safe handling prevents potential damage.

RS/RM Eye bolt/nut
Lifting Slings

RS/RM Eye bolt/nut

High-strength fixed lifting points not requiring swiveling The RS/RM eye nut/bolt must not be subjected to lateral loads. Therefore, it is not suitable for multi-leg sling systems. Use Star point VRS or VRM for lateral loads. • Difference from conventional ring-type eyebolts: The red color and octagonal shape signify Grade 80 quality class. • Identification: Unsuitable loading area, clear working load limit indication for transverse loading. (Not permitted for DIN 580/DIN 582. • Forged, 100% electromagnetic crack tested according to EN-1677-1: Material S235JR (1.0037/St 37) • Safety certified by the Trade Association "Iron and Metal" testing committee for the use of RS eye nuts. • On "RM" eye bolts, 100% engagement of the bolt thread is required. Bolt quality 8.8. • Available with inch and special threads. • Ensure that the nut/bolt is properly seated. • Turning movements must be avoided during transport. • A flat bolting surface (E) must be provided.

VCGH-S Heavy-duty hook
Lifting Slings

VCGH-S Heavy-duty hook

• Robust hook for bolt-on or weld-on applications, especially suitable for use with wire ropes and master links. • Robust hook latch prevents unintentional disengagement of the lifting gear.

VIP MAXI 28 X 84 MAXI-Program
Lifting Slings

VIP MAXI 28 X 84 MAXI-Program

The largest available size

VIP-100 Master links for small crane hooks
Lifting Slings

VIP-100 Master links for small crane hooks

Extra flexible, extra strong, extra safe for small crane hooks Order example: VBK.1.V0.20: VIP master link, 1-leg, VBK-1, chain diameter 20 mm

VIP-100 UW-PP - VIP-Universal swivels
Lifting Slings

VIP-100 UW-PP - VIP-Universal swivels

• Rotatable under load due to ball bearing. • Patented clevis connection • Can be loaded from any direction • Only use VIP chains and components approved by RUD

VIP-100 VBMHWA - VIP-Rebar hook, ball bearing
Lifting Slings

VIP-100 VBMHWA - VIP-Rebar hook, ball bearing

It is extremely important to use the right hook for the job on construction sites and in your facility. Forged hooks tailored to your requirements are manufactured to order.

VIP-100 VCG - VIP - Complete safety chain with overload indicator
Lifting Slings

VIP-100 VCG - VIP - Complete safety chain with overload indicator

Permanent visual indication in the event of an overload via a permanently installed, specially calibrated control link VCG, yet easily replaceable using the VVS-V connecting link. Immediate permanent visual indication in case of overload – with specially calibrated RUD control link VCG. Do not exceed the permissible working load limit! The calibrated gap width equals the specified nominal value. • Connecting link VVS-V • Simple hammer assembly (foolproof chain connection) • Control link VCG • With indicator bars and calibrated gap width (nominal... mm) • VIP chain, link • Additional safety element (chain) via bypass connection

VIP-100 VCGH - VIP - Cobra chain hook
Lifting Slings

VIP-100 VCGH - VIP - Cobra chain hook

• VIP lifting hook with safety latch • Hook body features gauge marks for checking throat opening and wear.

VIP-100 VGIL - VIP - ILG
Lifting Slings

VIP-100 VGIL - VIP - ILG

Danger from electrical current is no problem with VIP-ILG! Protect your crane and yourself when welding on suspended loads. Clevis links embedded in a special plastic in the VIP-IL suspension insulate against electric current. Can be used up to 1000 Volt and max 80°C operating temperature. Here, the hoist hook or crane hook must definitely be swivel-mounted. An additional swivel is not required.

VIP-100 VIP Container hook VCH-SL
Lifting Slings

VIP-100 VIP Container hook VCH-SL

Attaching: Automatically opening and closing without pressing the lock Detaching: Only by pressing the locking pin of the VIP container hook VCH • Compatible with ISO container corners. • The container hook is equipped with a patented lock. Disengagement from the ISO corner during lifting is no longer possible. • RUD VCH-SL hooks are suitable for vertical lifting and lifting at a maximum inclination angle of 45. • Clevis connection for size 16 VIP chain.

VIP-100 VVS-VIP - Connecting link
Lifting Slings

VIP-100 VVS-VIP - Connecting link

Third-party connections, e.g. lifting points, plate clamps, etc., can be attached to the wide clevis half (A2). Link halves can be combined with each other. The safety pin remains secure and cannot be damaged. Only the matching VIP chain or overload link can be fitted non-interchangeably (A1) into the link half with the hardened pin insert.

VIP-100 VW- VIP Balancer triangle
Lifting Slings

VIP-100 VW- VIP Balancer triangle

Our recommendation: With the VIP 2x2-leg balancer triangle, equal load distribution is achieved across all 4 legs, providing 33% higher load capacity compared to standard 4-leg slings. Higher load capacity: When using two-leg slings where a triangle (VWK 2S) is attached to one sling leg - suspended from both crane hooks - 4 load-bearing legs can be taken into account up to angles of 45° (BGR 500) with symmetrical load distribution. Use: The load capacity can be increased provided it is used at a slinging angle of no more than 10%. Since there are 4 load-bearing legs, higher weights can be lifted with the same chain. • While the upper connection of the balancer triangle is made with a shackle, • The lower connection is made with VIP connecting links or VIP shackles. • The maximum inclination angle of 10° marked on the bottom of the balancer triangle can be easily checked. • Suitable for RUD-ID-Point. • Detailed information about the VIP balancer triangle can be found in the operating instructions. • On 4-leg slings, a maximum of 3 load-bearing legs can be used. Under unfavorable conditions, 2 legs can be used.